You've proven the AutoProm is not set up correctly and ECM is working. You do not need AA until you make a change. May want to start with new bin? Some tips, no chip in socket, close pin, red stripe on cable to pin 1, on Memcal that would be outside of ECM, on chip type ECM it is on inside of ECM. Both switches on AutoProm in. Set up TunerPro to detect when open, start TunerPro with AutoProm plugged in and it should find it, if not try another USB port or look under Tools Data Acq and Emulation to set paremeters. Have bin and XDF open in TunerPro, upload bin to emulater, VERIFY, emulate, turn key on and watch for blink.
Bookmarks