Results 1 to 2 of 2

Thread: Hello

  1. 09-12-2020 #1
    ronfastway
    ronfastway is offline
    Carb and Points!
    Join Date
    Sep 2020
    Posts
    2

    Hello

    Hey everyone. Newbie to the whole LS thang. I have 2 projects going. Swapped a stock 5.3/4L60E/harness & PCM from a 2000 Silverado 2WD donor into a 1995 Chevy C1500 Stepside. Not running yet because I just haven't gotten back to it.

    Currently working on a 6.0 LQ4 truck engine from a 2004 Silverado and a 4L80E from a 1997 Savana 2500 that's going into a slightly lowered 1998 Chevy C1500 Stepside. Going to try this setup first: 6.0, LS7 cam, 706 heads w/PAC-1218 springs, TBSS Intake with 92mm throttle body and headers backed with the stock 4L80. Going to use a 411 PCM and factory wiring harness. I've read that the LS7 cam is NOT ideal for this setup but I guess I'm going to find out.

    Anyway...

    Any input or advice is appreciated.
    Last edited by ronfastway; 09-12-2020 at 08:20 PM.
    Reply With Quote Reply With Quote
  2. 09-12-2020 #2
    dave w
    dave w is offline
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,291


    gearhead-efi LS Tuning Link: http://www.gearhead-efi.com/Fuel-Inj...2-OBDII-Tuning

    dave w
    Reply With Quote Reply With Quote
« Hello :) | hello »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules