Hey guys, I wasn't really sure where to post this but here goes.

I'm struggling to get my ALDL cable to receive any information from the car. I've tried connecting with Scan9495 (v6 edition), ALDLDroid (USB), TunerPro. I've also tried Steveo's flash-hack tool as well as ALDL Fast Test and no matter what I do I can't get it to connect. The wiring seems to be good. I have 0 resistance on the grounds, power port has 12v and I have continuity from the wire at the pcm to the pin on the OBD port. I'm seriously at a loss here. Been battling this since early August and figured it was my Red Devil River cable. Ordered a new one that took a month to arrive and still nothing. I was able to read it once with the old cable before it stopped working. The car will start and Idle fine, but driving it is a no-go since it needs to be tuned.

Anyone have any ideas or suggestions I can try? I've read somewhere that the drivers can cause issues when using laptop programming, but the creator of ALDLDroid told me using it with the app shouldn't have those same issues and the fact that I'm having the same type of connection error across all programs makes me think it's not driver related. Also of note, while using Scan9495 it tells me in the communication tab that I'm missing an engine signal and and actuator signal, but can't seem to figure out why that's happening.

Any help is appreciated guys

Thanks,
Johnny