Hello everyone!
as the thread states, I am in the middle of a 12200411 PCM conversion on my '96 Trans Am WS6 LT1, I have got the car to run, albeit very roughly, but running none the less. I used the 2001 Chevy express Tune for the L31 engine, deleted the cam position sensor and the emissions stuff, Vats, etc.... I have installed Ford Blue Top 24lb fuel injectors, and I changed the flow rate in the bin file, the correct fuel rate in grams per second? and the car is smoking white smoke (raw fuel) I know very little about tuning from everything I have been reading, but not enough to get this car to run well enough to get it to a tuner to straighten it out. Can anyone help me "Iron this Out" at least enough to get the car to a tuner without grenading it, or burning it to the ground? I am using tunerpro RT to edit my bins, and using "LS Droid" to flash the files to my PCM.
I have attached my Bin file, if anyone would care to look it over, I'm stuck and could really use the help!
Thanks!
Ben Smith
Benjamin.L.Smith@hotmail.com
(816)956-1202
Bookmarks