memcal

[mecanicus]

Is it possible to read the memcal of a 8 cyl and flash it to a 6 cyl one? How do you do it?

[Six_Shooter]

Yes, and sorta.

It can be read, and programmed to a different MEMCAL, however, the LHM (Limp Home Mode) and hardware fueling side along with the knock filter will not be correct and will throw a CEL, there are modifications needed to have the hardware side of the MEMCAL match the programmed side.

There are threads on this, so search them up.

[mecanicus]

Hi,
meanwhile i found some threads from 2012.There is a list and this picture of the netres.But when I compare the resistance of my 6cyl memcal 68767 93322 3 from a 16196395ECM to the picture they are different.^Later on this day I will compare with the 8cyl memcal. Thanks.

[dave w]

It appears the topic is TBI Memcals? I've noticed some TBI V6 engines use two knock sensors. The Memcal knock sensor filters are different V6 vs. V8. I think a good plan would be to use a V8 Memcal for a V8 engine and use a V6 Memcal for the V6 engine.

dave w

[mecanicus]

Hi Dave, I do so! I have the V8 memcal for my V8.And I have a V6 memcal.I wanted to change the V6 memcal to a V8 one .It is easier to change when you try different bins! I guess I will by another v8 one but with shipping they sum up to 50 to 70 bucks.

[dave w]

Are you using the Moates.net G1 adapter?

dave w

[mecanicus]

simular ones, the zif socket on the memcal for the sf512 eprom and a self-build (picture somewhere here in the forum) adapter from memcal to zif.I disturbed some feed of eproms when i took them from the zif on the eprom already.

[dave w]

I'm confused, please post a picture of the memcal ZIF setup?

dave w

[mecanicus]

like the moat-HDR1

[dave w]

Moates.net HDR1

dave w

hdr1.jpg