Results 1 to 6 of 6

Thread: Question on OS and which BEN file for OS12208322

  1. #1
    Carb and Points!
    Join Date
    Jun 2020
    Posts
    4

    Question on OS and which BEN file for OS12208322

    Im sorry if this has been answered before, I looked and looked for it.

    I have a unknown tune in a 12200411 PCM with a O/S12208322 BIN file loaded on it for a 4.8 motor. The motor that it came with is a 5.3 (verified with bore scope).

    My question id this; Can I ONLY use BIN files written for the O/S12208322 system or can I us another BIN files made on a PCM that has a different Operating System? Thank you for your help! Motor is a 5.3 with 76mm turbo, 60lb injectors and a LS1 cam (unverified) Car will start but is pig rich rich and wont stay idling floods out and dies. Needing to load a base tune for a 5.3. Thanks again.

    Mark

  2. #2
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    There is a segment for 5.3 with that OS. Look for 2001 truck bin with 5.3l engine. The engine segment p/n is 9357818 for 2wd or 9357822 for 4wd.

    You can segment swap your current bin or start with new fresh bin with that OS for 5.3l.

  3. #3
    Carb and Points!
    Join Date
    Jun 2020
    Posts
    4
    Thank you so very much!!

  4. #4
    Carb and Points!
    Join Date
    Jun 2020
    Posts
    4
    Kur4o
    Quote Originally Posted by kur4o View Post
    There is a segment for 5.3 with that OS. Look for 2001 truck bin with 5.3l engine. The engine segment p/n is 9357818 for 2wd or 9357822 for 4wd.

    You can segment swap your current bin or start with new fresh bin with that OS for 5.3l.
    Can you help me out with finding this file? I'm seeing a bunch but I'm not sure I'm looking at the right one. I hate to ask, I've looked and looked and searched for p/n is 9357818 and I'm not finding it. Again sorry to ask, I hate when folks don't try to look first ask second. I've looked and I'm just lost lol. Thank you!!

  5. #5
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    All the files you need are here
    http://www.gearhead-efi.com/Fuel-Inj...rPro-Bin-Files

    The p/n is hard to find because most files are not labelled with it. The are labelled by OS number and this is engine segment cal number.
    To see it you need to open the bin and check the segment part by some tuning software or some freeware that can be found here
    https://github.com/joukoy/UniversalPatcher

  6. #6
    Carb and Points!
    Join Date
    Jun 2020
    Posts
    4
    Thank you Kur4o. I very much appreciate your help. I found the Calibration Segment using Tuner Pro and found the p/n one. Again thank you!
    Last edited by mark K; 07-24-2020 at 10:28 PM.

Similar Threads

  1. Asymmetric fuel question , plus fuel pump question
    By 1967Killer in forum GM EFI Systems
    Replies: 8
    Last Post: 08-29-2018, 10:55 PM
  2. Newbie question - GM bin file for 4l80e?
    By jalatl in forum GM EFI Systems
    Replies: 9
    Last Post: 01-19-2018, 04:56 PM
  3. Question on bin file values, or lack of them
    By Cmarks in forum TunerPro Tuning Talk
    Replies: 21
    Last Post: 10-31-2013, 05:06 AM
  4. Replies: 4
    Last Post: 03-02-2013, 04:52 AM
  5. Building a LT1 $EE ADS file from ALDL DS file?
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 51
    Last Post: 12-24-2011, 02:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •