TunerPro RT

[mewascom]

I can’t get TunerPro to connect on my lap top.
I test the cable and it says good until I plug it into the OBD1 and then won’t connect.
USB Port 3, Windows 8.1
is there a rookie how to? I’ve never “tuned” before.
using TunerPro and EEHack

[steveo]

eehack works but tunerpro doesn't?

do you have the correct ADX file loaded?

do you even care? for datalogging an LT1 eehack is light years ahead of tunerpro

[mewascom]

eehack works but tunerpro doesn't?

do you have the correct ADX file loaded?

do you even care? for datalogging an LT1 eehack is light years ahead of tunerpro

I actually wanted to load a free tune from EEHack, but I couldn’t get that to work.
I loaded your $EEHack for 94/95 Corvette.
I also tried to load my cars BIN File.
Don’t actually know what the correct ADX file is for a 1995 Corvette.
As I said total rookie, and there are no this is how you do it instructions for a beginner.
TunerPro wouldn’t talk to my car. If I unplugged from the OBD1 port the cable test would pass, but as soon as I plugged back into the OBD1 it would not communicate or pass the cable test on Com 3 port.
I’m trying to learn to tune, but I know I’m doing something wrong. I can data log in EEHack, but not Flashack either. Is there hope for me?
60AC0D2D-B018-4858-9AAC-71F6222C814A.jpeg This is Flashhack looks like it’s stuck in a loop.
6545A050-0FC8-4920-8D10-65ED956F2632.jpeg

[mewascom]

Stevo, Im trying to do more than just data log. I need to change temperature for the fans to turn on. Also, my corvette runs rich at startup so trying to change that to.
What Im not understanding is - Will Flashhack read/write the ECM, or do I need TunerPro to edit the bin or ADX file?
MY ECM number is 16181333 - Is there another compatible ECM number?
Im so green I don't even understand the menus on Flashack.
Please help me...... my email is mewascom@yahoo.com

[steveo]

tunerpro edits the bin
eex xdf tells tunerpro how to edit the bin
flashhack reads/writes the bin to/from the ecm
eehack logs your engine data