Results 1 to 2 of 2

Thread: Stuck in HEX

  1. #1
    Fuel Injected! TheApocalyptican's Avatar
    Join Date
    Mar 2012
    Location
    Las Vegas
    Age
    37
    Posts
    74

    Stuck in HEX

    Was doing some compares between bins and everything was going fine, and then all of a sudden the numbers are in hex instead of being defined as the correct numbers. Ideas on what I need to do to fix it?


    Edit:
    Well I found a setting that was either hex or calculated and changed it and now it's correct again. How this change itself in the first place?
    Last edited by TheApocalyptican; 05-30-2012 at 01:08 AM.

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    I think your talking about looking at paremeter settings in XDF TunerPro? If the paremeter is open and you right click on it you can change to see hex or real life human number.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •