I did some more thinking on the fueling part. With no cam position sensor, the 0411 will be in batch fire mode. This means that it will try to fire each bank 1 time in 2 crankshaft revs. To get more pulses, I was thinking about hooking up an injector from each bank to the same TBI injector. Not ideal, but would at least get you 2 pulses ever 2 revs instead of just 1 pulse in 2 revs. I believe that the TBI system is designed to do 8 pulses in 2 crankshaft revs, but need somebody to confirm this.
Does anyone know if hooking up the injector wires to the same TBI injector will cause any issues? The plan would be to solder in resistors to compensate for low impedence TBI injectors.
Bookmarks