To start things off ive been trying to figure this out for the last three days with no advancements. I bought myself a Moates aldu1andcabl1, and Ostrich 2.0, and G1 adapter. Once i got everything i installed all the Moates drivers and tunerprort,Winflash. With the untouched ECM i tried to pull the factory files with winflash and repeatedly got errors. Went onto the moates support page and went threw the trouble shooting guide, using Tunerpro to test the functions of the cable(All functions working properly). But still wasn't able to connect using winflash, after that i tried to use the TunerProsrt data scanner. That kept giving me errors, after trying to trouble shoot them i figure out if i removed all the extra fuses besides the ecm,ccm fuses i got no more errors but the data would have random spazzes and would glitch everything out. I couldn't figure out what was going on so i decided to swap everything over to the Ostrich and load in a bin,xdf,ads/adx file.
Using the files under the 16159278 ecm thread i used the Da2.xdf along with the $da2.ads converted to a adx file and uploaded it to the ostrich each of the attached bins seemed to give me some sort or problem between no start or starting and turning off with in a few second. And the last file i used is the BDBK file which allows me to start and idle but wont rev past 3k as well as with ignition on both fans turn on (high speed) and the odometer reads 0. I found out if i remove the gauges fuse fans turned off and idle smoothed out. Those problems don't occur with the other bins but the car wont run or idle with the other bins listed. Threw out all of the bin swapping also decided to datalog what was going on but now there is no connection with the ecm... I decided to go back into tuner pro and read threw everything and found out that the da2.xdf file seems to be missing half of the flags scalars and tables. After some searching i found another xdf file listed as $DA2222222 put that back in tunerprort and went over everything again to see if it would help and no luck.
After all that im stuck and not sure where to go besides trial and error hoping i find a file that works. Any help or guidance id appreciate it greatly!
If anyone happens to have the factory/stock xdf,bin file for a 92 auto($DA2,16159278). A ads or adx file would be great as well so i can figure out whats going on.
First post btw if i messed anything up my bad.
Bookmarks