Hello!

[Snipescastle2]

bus is silent isnt an error, what is the actual error?
are you running the latest version?
its possible you have no connection due to a wiring issue or a dead ecm

Steveo,
i ran a separate wire to pin 30 on the blue connector, and another to chassis ground,
I made sure my connections were solid, had continuity on both, end for end.

i’m going to snap a picture of the message that comes up later today when I get back to the house.
I trust the guy I bought the PCM from, so i doubt its dead. Probably my mistake.
I’ll let you know what I find.
thanks!
Ben Smith

[Snipescastle2]

Steveo,
Here’s the message i keep getting when i try and connect using
FlashHack:

[Snipescastle2]

Steveo,
Had an issue with my aldl cable, but it works fine now.my pcm works just fine,
now i just need to change my upstream O2 sensors to real ACDELCO
Ones (I cheaped out and bought generic ones, and surprise, surprise....
They wont register with my PCM, either one of them) guess its gonna be
A long road understanding how to do this tuning thing.
Have a great Fourth!
Ben Smith