Tuner Pro & $EEHack files for PCM 16212471

[mewascom]

Anyone know the proper .adx file and .bin file for Tuner Pro & $EEHack files for PCM 16212471?
1995 Corvette LT1, OBD1, Automatic, 3:07 rear. Car is bone stock. I have the cable the software programs downloaded, but afraid to use just the $EEhack.
Ive seen the EEHack file for street tune, but only has 2. rear gear and higher but no 3:07.
Any help is greatly appreciated for this rookie.

[NomakeWan]

I have a 1995 Corvette as well (though it’s a manual) and a 1994 automatic with the 3.07 rear.

My recommendation for XDF is EEXtra 0.003: http://www.gearhead-efi.com/Fuel-Inj...E-xdf-(EEXTRA)

I would recommend that you download the latest version of Flashhack from Fbodytech, use that to download your stock BIN, save a copy in a safe place, and then edit it to your liking using TunerPro. Then flash the updated BIN using Flashhack. Datalogging using the latest version of EEHack is simple and effective.

Welcome to the Corvette life!

[steveo]

the procedure i recommend is:

1. download bin with flashhack
2. log while driving with eehack
3. analyze those logs with eehack
4. tune that bin you downloaded earlier with tunerpro and EEX xdf
5. upload new bin with flashhack
6. repeat to step 2 until tune is good

[mewascom]

the procedure i recommend is:

1. download bin with flashhack
2. log while driving with eehack
3. analyze those logs with eehack
4. tune that bin you downloaded earlier with tunerpro and EEX xdf
5. upload new bin with flashhack
6. repeat to step 2 until tune is good

Thanks for the info 8 will give that a go.