Does any one have a tune for a small cam swap. I have tunerpro rt and it won’t connect to the car to data log. I have bought two tunes but none seem to do what I need. Put a small cam in and can’t even tell by the idle the tunes I have have the timing at 20 plus degrees advanced at idle. Ready to get ride of this mess and get a carbureted car. Thanks Bill
here we tune cars ourselves and usually need datalogs to do it, do you want to figure out why your datalogging isn't working? we can probably help with that. what adx are you using?
a true 'small cam swap' should run alright without a tune and i bet the tunes you bought changed very little. do you feel its running badly or does it just not have the power you expected?
if it's just a matter of you 'finding a pre-made tune or get a carb' because fuel injection seems like a mess to you, i doubt we'll be able to prevent you from getting a carb so go right ahead. out here at gearhead efi we log, adjust, and repeat until things are awesome.
Hi Thanks for the reply. Using code59.8 TP5 only adx and Da2xdf. I know the cam is on the smaller side but should have a little bit of lope. Double checked with lunati and it should have lope not radical but a little bit.
did you try using the ADS in this thread?
http://www.gearhead-efi.com/Fuel-Inj...mation-DA2-DA3
corvettes can be really complainy to datalog if you pull the CCM fuse just while logging, you might have better luck (although not much for a dashbaord i guess)
Posting Permissions
Reply With Quote
Bookmarks