Results 1 to 8 of 8

Thread: Help Needed... XDF File for OS 12593359 in a 99 Corvette

  1. #1
    Carb and Points!
    Join Date
    Jan 2020
    Posts
    7

    Help Needed... XDF File for OS 12593359 in a 99 Corvette

    Evening All, (well it is in Scotland!)

    As the title says I'm looking for an xdf file for a 99 Corvette with a 411 PCM,

    Can you help?

    Bob

  2. #2
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    65
    Posts
    339
    Hello Bob,

    Is there something particularly attractive about 12593359 to you? There are several other versions of 512k byte operating systems out there that have well-stocked, matching XDF files - will work perfectly for your 411 PCM. I have three different sets here that I dabble with:

    12208322

    12202088

    12212156

    My particular versions here support a 5.3 L engine and a 4L60E automatic transmission. All three of these at one time or another have completely replaced whatever original OS was in each PCM to support my 1970 El Camino.

    Maybe they can work for you unless you have a more difficult requirement to fill.

    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

  3. #3
    Carb and Points!
    Join Date
    Jan 2020
    Posts
    7
    Hi Rick,
    Thanks for the reply.

    The only reason that I'm trying to work with the OS is thats what's in the PCM.

    It was configured in the US and shipped over and works BUT, I may have to adjust the Tach signal to get it to match stock guages etc...

    I would be happy to use a later corvette OS that is supported but I have no way of finding what has been set in the existing one

    Any suggestions would be appreciated.

    Bob

  4. #4
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    65
    Posts
    339
    Hello Bob,

    Have you thought about flashing your own PCM? Its not that tough or expensive these days requiring a bench harness, small two amp, 12 volt power supply and a certain Bluetooth OBD2 module. Any of the three OS examples above should work nicely for you as long as you have the engine and transmission noted.

    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Hi Bob,
    Just a thought I would like to share. Purchasing an additional '0411 computer to learn with is an option? Possibly the "spare" '0411 would be flashed with a common OS like the 12212156. The 2002 Corvette used OS 12212156. Perhaps the attached 2002 Corvette .bin file might be helpful to learn with. The "mule" is an '0411" bench PCM I flash and then read as a .bin file. The Read 1999 Corvette 4L60E.bin was read directly from the vehicle computer.

    dave w
    Attached Files Attached Files

  6. #6
    Carb and Points!
    Join Date
    Jan 2020
    Posts
    7
    Hi guys and thank you both for the reply's.

    Rick, I already have all the required kit to do it but this is an oddball vehicle which is why I'd like to see what has been changed in the "new" PCM (which I have already taken a .bin file from...)

    Dave As above, I have a test 411 and my plan was to load the "new" PCM config onto that for testing.

    The 2 areas that I'm not certain about are that the LS1 is coupled to a Turbo400 which has an Electric kickdown which has been provisioned in the new PCM somehow and as theres no VSS signal coming in have the maps been changed....

    I will certainly try loading these 2 .bin files and have a look.

    If either of you could throw some light on the kickdown setting that would be appreciated.

    Bob

  7. #7
    Carb and Points!
    Join Date
    Jan 2020
    Posts
    7
    Dave,
    Am I right in reading the OS for the 1999 Vette as 9379910?

    Bob

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    The attached 1999 Corvette EFI Live .ctz file was downloaded from tunefiledepot.com, which has been shut down for several years now. EFI Live has free version to view files - https://www.efilive.com/download-efilive

    dave w

Similar Threads

  1. Bin file needed
    By Dishmael in forum GM EFI Systems
    Replies: 9
    Last Post: 12-06-2019, 04:53 PM
  2. 1996 corvette bin files needed
    By barchetta in forum OBDII Tuning
    Replies: 4
    Last Post: 12-20-2018, 01:11 AM
  3. 93 corvette experiance needed..
    By Axman in forum GM EFI Systems
    Replies: 7
    Last Post: 05-05-2016, 07:32 AM
  4. NEEDED! A $5b5 ADX file.
    By damanx in forum GM EFI Systems
    Replies: 4
    Last Post: 05-29-2015, 03:41 AM
  5. 2009 Corvette ls3 cal needed
    By MYLTWON in forum TunerCat OBDII
    Replies: 4
    Last Post: 10-20-2013, 04:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •