Results 1 to 4 of 4

Thread: $DA3 stock settings

  1. #1
    Carb and Points!
    Join Date
    May 2012
    Age
    59
    Posts
    3

    $DA3 stock settings

    Is there a stock bin for a 93 LT1 that can be used for a comparison against the bin on my chip. I know it has been modified, because the car has been modified. I would like to put it back stock and see what happens, am I way off with this? I have put the car back stock as far as I can tell. New cats and 02's tomorrow then I will do a datalog. Trying to pass CA smog. $DA3 is the xdf

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    There's a fe in this thread:
    http://www.gearhead-efi.com/Fuel-Inj...mation-DA2-DA3

    What is the stock BCC if not there and I will look to see if I have one not loaded above. Should be on ECM sticker.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Carb and Points!
    Join Date
    May 2012
    Age
    59
    Posts
    3
    86BDBK M130120886 93 vette LT1 5.7l Thanks for the help, not sure what I am looking at.

  4. #4
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    BDBK is in the thread above. Looks like it was used 1992 and 1993.

    http://www.gearhead-efi.com/BCCFind/...shtml?BCC=bdbk

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •