1995 camaro owner

[mullettcar]

told i needed to say hi,lol
hi guys looking forward to learning more about tuning my camaro and hopefully seeing some pics of some cool rides.

[sherlock9c1]

Welcome! Can you add your location information to your profile? Tell us some more about your camaro and goals?

[steveo]

welcome, you're in good company, especially if it's an LT1, lots of good stuff in my signature for you to try out.

[mullettcar]

thanks thats great i have tuner pro rt and eehack as well as 94-94 i have the cable.
so far i have figured out how to delete things like egr CATS air pump etc.
re calibrated my speedo because i changed my rear end and have vette wheels.
other then that have not done much with the tuning but i am looking forward to learning.
i have a cold air intake a 58 mm throttle body 3 inch exhaust bbk headers cat delete and air pump delete.
not to sure if i need to tune anything with those mods but hopefully i find out here.
thanks for making me part of the family.

[steveo]

if your car is an automatic you need to recalibrate your transmission for that throttle body as the line pressure is pretty much controlled by the TPS (you're now getting quite a bit more air per degree of throttle and the transmission needs to know that)

you should recalibrate your maf table a bit down low to account for the cold air intake (eehack has a button that'll read your log and tell you how to correct your maf table)

you should adjust your o2 sensor delay settings due to the different o2 locations from your headers as well as the different sizes tubes

that's a good start

[mullettcar]

thanks i will see if i can figure some of this out but i think i will be asking for some help still pretty new at using tuner pro and i had the old eehack before that i thought just flashed i have the new one and it looks pretty neat just going to need some help figuring it out.

[mullettcar]

so i ran eehack saved it how do i put it up for you to see cause i was looking on how to change the MAF but i couldn't find a button or a way to calibrate it and i see it going red when i looked at the datalog is there a way to show you my data log?
datalog27.PNG