Page 4 of 6 FirstFirst 123456 LastLast
Results 46 to 60 of 90

Thread: 93 V6 flash

  1. #46
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    that's too bad, it seems to be based on eehack 4.7 which i know usually logs for hours with no problem? not sure what the bug would be.

    if you can't make eehack work, another alternative is to log with tunerpro rt

    then you can export your logs as CSV files and run them in trimalyzer for analysis

    it's a bit harder to use than eehack but not much http://fbodytech.com/trimalyzer/

  2. #47
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    I will run a test lpg on bench and see if there is any issues. I suspect another win10 bug. Which version of eehack you installed. You need v4.7, the newer one is compiled with later version of some of the files might give an issue.


    If you want to try a flash, post the bin and I will convert it to the format for flashing with eehack.

  3. #48
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    Thanks guys,
    Just to be clear I am using eehack_v6_w4_4.

    I also have eehack 4.9.1

    I have also been logging with tunerpro and using trimalyzer.
    Attached Files Attached Files

  4. #49
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    I just made a 1 hour log with no issues.

    Steveo can you provide a link with 4.7 installer. It might be some libraries issue or win 10. I want to be sure.

  5. #50
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    I've gone back and reread all the instructions you guys have given me and I may be little confused here. At first I understood that I should launch eehack and load the v6 definition files. Never could connect, then it was said to launch eehack_v6 which works except for data logging. In the last post I was asked if I was using eehach 4.7 instead of 4.9. If I am launching eehack_v6 is eehack even being used.
    Went out and tried connecting with again eehack with no luck.

  6. #51
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    sorry i did mean to say eehack_v6 (which probably should be called p66hack or something)

    i don't think eehack with the v6 definition file is viable. the next version of eehack might work for that, though, as i'm redoing the connection code to not care what vehicle you have

    Steveo can you provide a link with 4.7 installer. It might be some libraries issue or win 10. I want to be sure.
    http://fbodytech.com/files/eehack4.7-install.zip

  7. #52
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    So do I need eehack 4.7? This is where I'm getting confused. If I'm using eehack_v6 (p66hack sounds good)do I need eehack 4.7?

  8. #53
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    To clear the confusion.
    You need eehackv4.7 installed because it comes with some dll files that are needed to run the eehack_v6_w4_4

    Now install eehackv4.7 than copy the eehack_v6_w4_4 in the install folder of eehack v4.7. Than open eehack_v6_w4_4 and select the v6 def file.

    Than you are good to go.

    I hope that clears it.


    You`d better wait a little more till new flashhack is tested with v6s flashing. It will be much more secure to use for writing and no need to convert the bins.

  9. #54
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    Ok, thanks man, I will do that. Thank you for all the help, i know you guys are busy and I appreciate you taking the time to walk me through this. I’ll get it figured out and keep posting. Let me know when flash is ready to try.

  10. #55
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    Ok guys, that seemed to work! As long as my laptop stays awake, and then all it did was disconnect. I was able to save the log and reconnect and drive on. logged 27 minutes.
    I go back to work next week and I will do much more logging(100 miles round trip)

  11. #56
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    Quote Originally Posted by kur4o View Post
    You`d better wait a little more till new flashhack is tested with v6s flashing. It will be much more secure to use for writing and no need to convert the bins.
    does the mode 4 stuff in v6 eehack work? is it much different?

    when i put flashhack's connection code in eehack, i think we might just want to support the v6. the flash tool was the biggest problem to support anyway. definition files are easy enough

  12. #57
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    Here is some cleaned up definition.
    Added some extra stuff and cleaned the leftover stuff. Still needs some bits and DTCs added.


    dbuster,

    The new flash tool for v6s pcm is ready to test. If you are willing to sacrifice a test pcm you can give it a try. I bet it will work on the first try.
    Attached Files Attached Files

  13. #58
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    I thought I replied to this yesterday but I must not have posted it. I some how miss placed about two hours of logs I made last week, and tonight I found that I can't load logs from eehack 4.7 and 4.9 at the same time into trimalyzer. I can only load one or the other so I will do some more data logging this week and then try to flash my bench unit.

  14. #59
    Fuel Injected!
    Join Date
    Jul 2019
    Location
    Orange, CA
    Posts
    757
    What about loading the log from 4.7 into EEHack 4.9 and then saving it again to “convert” them? Does that work?
    1990 Corvette (Manual)
    1994 Corvette (Automatic)
    1995 Corvette (Manual)

  15. #60
    Fuel Injected!
    Join Date
    Jul 2016
    Age
    62
    Posts
    52
    Not sure, I'll try.

Similar Threads

  1. EBL flash ecu
    By blue68deville in forum Buy - Sell - Trade - Wanted
    Replies: 1
    Last Post: 06-22-2019, 05:40 PM
  2. Jet flash error
    By 01z28auto in forum TunerCat OBDII
    Replies: 4
    Last Post: 05-08-2019, 06:14 AM
  3. LT1 pcm won't flash anymore.
    By babywag in forum GM EFI Systems
    Replies: 7
    Last Post: 10-06-2018, 12:06 AM
  4. 383 tbi ebl flash
    By twistedc1500 in forum GM EFI Systems
    Replies: 4
    Last Post: 05-02-2018, 11:46 PM
  5. Ebl flash
    By Stokes1114 in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 01-15-2017, 10:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •