Looking for info on flashing 93 v6 (16172693) I find a lot for 93,94,95 lt1 but no v6. I have tuner pro RT with the P66-V6 files and scan9495-v6. I am able to connect and datalog. Mainly wanting to be able to turn off vats and other unneeded. I am running a 3400 FWD converted to RWD in a 79 MGB. I had the computer programed for me. Wanting to do another conversion and would like to do the programming myself.
I made some eehack v6 beta version for the 94-95 pcms.
Most of the stuff don`t work except for reading and some datalogging so just ignore the other functions.
Flash was bench tested on a 94 v6 pcm but no thorough tests were done.
You can try a test read to see how it goes. Don`t attempt any flashing yet, it uses slightly different bin file format.
Extract the files to the installation folder of the lt1 eehack v4.7 and run from there. On startup select the v6 definition included in the zip.
I don't have eehack yet, I will look into it, thanks.
there's a plan to make my new flash tool work with a V6 but it might be a little bit.
down loaded v4.9 and your v6 eehack, got them installed but cannot connect. Not sure if I am selecting v6 defenition correctly.
it doesn't show up when I select directory I have to go find it. I can connect to Tuner pro and scan 9495 so my connection should be ok.
Last edited by dbuster; 04-15-2020 at 03:30 AM. Reason: typo
DATASTREAM ERR: No reply.
SERIAL ERR: Corrupt data in echo! Possibly a bad serial interface or noise on the bus.
This is what shows up in debug log.
My computer is obd1 EEHack apears to be obd2, is this going to work?
Posting Permissions
Reply With Quote
Bookmarks