Results 1 to 9 of 9

Thread: Any workaround for Tunercat OBD-II editior from not crashing ?

  1. #1
    Carb and Points! teamzr1's Avatar
    Join Date
    Apr 2020
    Location
    West Coast
    Age
    73
    Posts
    9

    Any workaround for Tunercat OBD-II editior from not crashing ?

    This problem has been around since Windows XP and gotten worse with newer Windows like 7, 8.1 and 10

    The larger the flash file is (newer the vehicle is) the more apt some type of failure occurs while editing a flash file,
    if for PCM or TCM.

    Even with newer MSwindows and installing Tunercat OBD-II as an Admin and to run either in XP 2 or 3 compatibility mode
    does not prevent the editor from crashing while in process of working within a flash file

    Worse is again using flashes that are larger in size and doing a compare with another flash file and even though as example
    the P/C has 10 gigs of free RAM, the editor crashes with MSwindows saying no memory free.

    I have several either P/Cs or laptops, with XP, 7, 8.1 and 10 and they all have the same crashes and really makes it a pain in the
    ass as to just making a few tuning value changes, then doing a save, and then make more changes, and keep doing that until
    tune changes are done

    I assume this is some type of runtime issue or editor was compiled with older (like 2002) Vbasic and needs the editor software code
    compiled to function with newer MSwindows

    Anyone found a fix or workaround for this ?

    Thanks
    Attached Images Attached Images
    JR - Team ZR-1 Corvette Racers

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I'm using TunerCats OBD2 with Win 10.

    What helps me prevent crashing is the way I open a .cal file.

    I first load the .cal from a C drive location. (working from UBS Memory device is problematic)

    After making sure the .cal is opened, I completely close the TunerCats OBD2 program.

    I then Restart TunerCats OBD2 program.

    I then select the same .cal file from the "File" drop down menu.

    dave w

    Load from C drive.jpg

  3. #3
    Carb and Points! teamzr1's Avatar
    Join Date
    Apr 2020
    Location
    West Coast
    Age
    73
    Posts
    9
    Hi Dave, thanks for the reply

    I see your using different software the RTT which is different coding then the
    OBD-II Tunercat software I use so problems may be different but shows common faults in ways it crashes no matter what version
    of MSwindows is used :(
    JR - Team ZR-1 Corvette Racers

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I understand the different versions. I was optimistic the work-around I use would help with your the version your using.

    dave w

  5. #5
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    I'm not sure I have much to offer but what I've seen. Reading/writing/editing ecm's and pcm's I only use WinXP 32bit and have never had an issue with TC on multiple laptops through the years. Shoot, I still have some software that I have to keep a Win98 laptop around for. I've never had an XP 64bit system. My programming laptops rarely ever see the internet and when I need to transfer files I use a thumb drive. Now that some software requires Win7 or newer(Holley for example), we have no choice but to have another laptop. I see nothing but problems with my Win7 64bit, screens flashing on and off for no reason, complete freeze of computer but my mouse still moves around and more crap than I care to remember.
    Now that the later .net framework and Visual Studio stuff doesn't work on XP we have a lot of problems with older software and compatibility mode is useless.
    The good news is refurbished XP laptops on ebay are very reasonable as long as you check the seller. Local computer refurbish guys on craigslist has worked for me too.

    I wish I had a better answer for you.
    -Carl

  6. #6
    Carb and Points! teamzr1's Avatar
    Join Date
    Apr 2020
    Location
    West Coast
    Age
    73
    Posts
    9
    Quote Originally Posted by In-Tech View Post
    I'm not sure I have much to offer but what I've seen. Reading/writing/editing ecm's and pcm's I only use WinXP 32bit and have never had an issue with TC on multiple laptops through the years. Shoot, I still have some software that I have to keep a Win98 laptop around for. I've never had an XP 64bit system. My programming laptops rarely ever see the internet and when I need to transfer files I use a thumb drive. Now that some software requires Win7 or newer(Holley for example), we have no choice but to have another laptop. I see nothing but problems with my Win7 64bit, screens flashing on and off for no reason, complete freeze of computer but my mouse still moves around and more crap than I care to remember.
    Now that the later .net framework and Visual Studio stuff doesn't work on XP we have a lot of problems with older software and compatibility mode is useless.
    The good news is refurbished XP laptops on ebay are very reasonable as long as you check the seller. Local computer refurbish guys on craigslist has worked for me too.

    I wish I had a better answer for you.
    Hi Carl
    Thanks for the reply, I think your correct about if MSwindows is 32 or 64 bit, most P/C and laptops are 64 bit and crashes for the editor seems to crash very easy then if using a older P/C using a 32 bit XP version

    I have tried to install earlier versions of .NET, VS and Vbasic runtimes but news MSwindows do not support older versions

    I assume people who are using older versions of the Tunercat OBD-II editor have less problems, I use whatever newest updates found on
    Tunercat website is at V 3.55

    I used to have problems also with the Winflash but John had come out with a Winflash for the dealers kit which was written few years back and
    is coded to work on newer MSwindows, version 4.25 and zero issues with that version but for whatever the reason Tunercat says they cannot find
    the problem as for the editor crashing in different ways :-(

    I have to assume as you did that when the editor was first written it was complied for older .NET and VB which does not work correctly with newer versions of those 2 MS programs.

    This is really bad as if I do not keep saving as I make tune changes and editor crashes then I loss all the changes and time I had done and have to start over again so was hoping some other Tunercat owners have found some workaround or band-aid to solve this :-(

    Yet as I mentioned sometimes the editor crashes saying no free memory when task manager shows 10 gigs free or crashing saying the client has disconnected
    and when I am custom tuning my P/Cs or laptops are set to have minimum programs or DLLs, etc running in background and they are set for best performance which limits 40 or less MSwindows processes running :-(
    I see no reason if CPU is 3 Ghz or more and multi processors should crash when using a small program like the editor


    Problem is I use other programs like a professional OBD I/II scanner and it will not work on Win XP and older laptops do not support newer windows and caps off with maximum 3 Gig of memory or do not have enough USB ports

    Thanks
    JR - Team ZR-1 Corvette Racers

  7. #7
    Fuel Injected!
    Join Date
    Dec 2013
    Posts
    87
    i have same problem, gets even worst with new car\truck .Cal files.

  8. #8
    Carb and Points! teamzr1's Avatar
    Join Date
    Apr 2020
    Location
    West Coast
    Age
    73
    Posts
    9
    Quote Originally Posted by NISANDA View Post
    i have same problem, gets even worst with new car\truck .Cal files.
    When Tunercat OBD-II tuner came out around 2002 GM flashes in most cases were only 512K bytes and that was for PCM and auto tranny
    Now GM calibrations are like 4 mg bytes and that is each for PCM and TCM

    I suspect early on they coded software for a much smaller free working memory space and now runs out of that memory space

    Another problem I do not know if it is the runtime for VB or .Netframe used in 2002 but editor program is not compatible with either them for newer versions
    of those MSwindows programs

    Cannot get anyone to get involved to at least get some workaround and I have lots of money spent in all the VDFs I have bought since 2002 :-(

    So was hoping others here find ways to resolve these hard crashes.
    JR - Team ZR-1 Corvette Racers

  9. #9
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    if you run software that doesn't work on newer computers, virtualization is what you're looking for. install windows XP 32 bit in a virtual machine and install the software there. the software to do that is free (google virtualbox). you can run operating systems within operating systems, and your 'guest' operating systems are pretty much isolated from your real computer. modern processors have virtualization instructions that make this type of emulation very fast.

Similar Threads

  1. TunerPro crashing on XDf load
    By sodak02 in forum TunerPro Tuning Talk
    Replies: 2
    Last Post: 12-08-2019, 04:06 PM
  2. Workaround for 24/7 power requirement
    By BBPanel in forum GM EFI Systems
    Replies: 0
    Last Post: 11-11-2019, 10:50 PM
  3. Need Tunercat DataPro help please
    By Npohl545 in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 03-03-2019, 08:59 PM
  4. tunercat tunning
    By aboturky in forum TunerCat OBDII
    Replies: 9
    Last Post: 10-13-2016, 04:25 PM
  5. tunercat how i buy
    By aboturky in forum TunerCat OBDII
    Replies: 20
    Last Post: 12-25-2015, 09:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •