Working on a 63 nova for my wife. I have a LQ4 out of a 2005 Hummer H2 going in it. It will have a 4L60 transmission behind it. I have reworked the harness and have the engine on a test stand for now. I'm finally at the point where I'm ready to fire it up so need to remove the VATS and then go from there. I am new to LS engines as I'm an old school big block Chevy guy so any help is appreciated. This is a stock LQ4 so just looking to get it running and codes cleaned up.

I picked up a OBDLink MX+ and pulled the original BIN off the ECM. The original OS is 12592618 so from searching around on here it looks like the best thing to do is to change the OS to 12587603 and then use a 2004 BIN?

I did find the 2005 Hummer H2 BIN file on here (http://www.gearhead-efi.com/Fuel-Inj...6&d=1361710568) so am confused as to what I should be doing.

If I use the 2004 XDF and my BIN in tuner Pro RT, I can see where I can change the VATS to disabled but I believe that the XDF and BIN should match?

Sorry for basic questions but just getting started. Thanks in advance.