ah super easy. i use a minipro from ebay on the cheap and it's worked great but you can go ahead and get something from moates.net if you want. get a few (i think) 29c256 chips and don't write over your original, that way no risk.
get the original bin from the original chip using your chip burner,
get tunerpro (free)
get an XDF file from here
http://www.gearhead-efi.com/Fuel-Inj...mation-DA2-DA3
load bin and xdf
make changes
burn new bin
swap chip
if you need to do LOTS of tuning which would involve taking the chip in and out a hundred times, then use an emulator and/or a zif socket so you don't end up breaking something
Bookmarks