EDIT: I had used the wrong ADX file like a fool. Got the correct file and it was pretty clearly the TPS. Got the new TPS installed and the truck is running strong and idling correctly.
Hey everyone, I pulled my first log file today and I am feeling very confused. I downloaded the ADX file from this thread: http://www.gearhead-efi.com/Fuel-Inj...Information-85
I am using TunerPro RT and this cable: http://aldlcable.com/products/aldlobd1u.asp
The truck is a 454 that idles higher than I would like. In TunerPro the RPM seemed to go DOWN as the engine revved higher, the temp sensor [Brand New sensor] reports -40c and the IAC shows no steps. The map sensor also didnt move. Both tests were done sitting still, engine warm.
My gut is telling me the ECU must be bad... Im really hoping that I just dont have this configured correctly though.
Test 1.xdl
Test 2.xdl
Starting with another new temp sensor and wondering if that will change anything. Thank you all for your help.
Reply With Quote
Bookmarks