Results 1 to 6 of 6

Thread: Some Injector Info

  1. #1
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847

    Some Injector Info

    I probably should be outside working but it's still a little chilly and the grass is wet so there's my excuse.

    The following info was obtained from Delphi's website several years ago. Once upon a time they would give you access to a wide range of technical data for injectors so I grabbed as much as I could. This info is specifically for "bottom feed" injectors typically found in model 700 TBI units, V8 TBI units with a speed governor, PFI injected 2.2 LN2 and 2200 engines, Saturn 1.9L TBI cars, and in Holley replacement TBI units. A typical bottom feed injector is shown below. Sorry to post it in Excel format but I just don't know another relatively easy way to get it posted and formatted correctly.
    Multec_BF.JPG
    Attached Files Attached Files
    Last edited by 1project2many; 05-19-2012 at 03:02 PM.

  2. #2
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    Marelli "mini" injectors. Found in Edelbrock pro-flo and other aftermarket systems. I obtained a marine manifold years ago using these injectors and had a tough time finding flow rates.

    Marelli_mini.jpg
    Attached Files Attached Files

  3. #3
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    Keihin injectors. Keihin is a major player in the Asian market and supplies injectors in many different styles. I needed injector flow data for a Mercruiser intake I obtained years ago and one of the injectors was in this hard to find list. I've included the original files and drawings although I'm not sure where I obtained them.
    Attached Files Attached Files
    Last edited by 1project2many; 05-19-2012 at 04:08 PM.

  4. #4
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    A simple list culled from information on Delphi's site. GM applications by flow@ pressure. Great when junkyarding or searching C-list and Evilbay. Unfortunately the TBI data wasn't complete. Also some dimensional info on the newest generation of Multec injectors sometimes called "pencil" injectors.
    Attached Files Attached Files
    Last edited by 1project2many; 05-19-2012 at 04:07 PM.

  5. #5
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    Grass is dry and temps are up. Gotto go!

  6. #6
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Wow! Proves internet rumors of injector flows wrong/high/low...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •