Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 48

Thread: OBD logging and real-time histogram

  1. #16
    Electronic Ignition!
    Join Date
    Jan 2019
    Age
    39
    Posts
    14
    Quote Originally Posted by woody80z28 View Post
    Ok, I never did get a chance to try out PID 119E tonight (busy being Mr. Mom)...but added some notes to my ADX and attached it here. (Use at your own risk...I'm new to this)

    Interestingly enough: my wideband came in and has some options my 2010 AEM doesn't. It has the typical 0-5v output, but also options for 1-2v, 0-1v linear and 0-1v simulated NB.

    So I just did a little looking and I'm actually thinking about adding Blue pin 68 to the PCM for o2 sensor #3 and PID22 so I can retain EGR function. I don't have post-car o2 sensors on my 2500hd, so as long as it will read the data, I don't lose any functionality.
    Thank you so much! Once I get my car more reliable, I will start getting more involved into this to see if I can help.

  2. #17
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    So my additons for Target EQ won't work for PID119E or PID68. I get nonsensical data...which seems tied to vehicle speed for some reason. Same with the PID22 for the rear o2 sensor (that I added the wire in). Voltage is 0 at a stand still, and climbs with vehicle speed. Not sure what I'm doing wrong.

    My next plan is to change my wideband from 0-1v to 0-5v and try the EGR position wire. But I'll have to flash a new tune to zero out EGR added spark and physically unplug the EGR and tap into the wire. I'm not hugely excited on that idea...but I need something to work.
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

  3. #18
    Electronic Ignition!
    Join Date
    Jan 2019
    Age
    39
    Posts
    14
    Quote Originally Posted by woody80z28 View Post
    So my additons for Target EQ won't work for PID119E......
    So from what I am reading, You are trying to log in open loop and trying to get rear O2s to work correct?

  4. #19
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    Quote Originally Posted by woody80z28 View Post
    So my additons for Target EQ won't work for PID119E or PID68. I get nonsensical data...which seems tied to vehicle speed for some reason. Same with the PID22 for the rear o2 sensor (that I added the wire in). Voltage is 0 at a stand still, and climbs with vehicle speed. Not sure what I'm doing wrong.

    My next plan is to change my wideband from 0-1v to 0-5v and try the EGR position wire. But I'll have to flash a new tune to zero out EGR added spark and physically unplug the EGR and tap into the wire. I'm not hugely excited on that idea...but I need something to work.
    It still can be config issue, or the OS doesn`t support afr pid.
    What kind of pcm and OS you are trying to log it.

    You can try the stnterm.exe to manually log the pid and see if it gets 7f response or it gets actual data.
    The elm config through tunerpro is some dark magic for the enlightened.

  5. #20
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    8322 os on a 411.

    Logging in closed loop, but trying to read my wideband via the bank 1 sensor 2 circuit. Target EQ is just to have a reference on what's going on when not in closed loop (warmup, pe, etc.) I have target AFR on my obd1 car and it's handy.

    I'll Google stnterm.exe when I get a minute. Thanks
    Last edited by woody80z28; 03-06-2020 at 04:11 PM.
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

  6. #21
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    Do you have the stock bin. I will make a list from it, what pids are supported for the OS, so you can log some extra things. There could be even some free 0-5v pins not used by your setup.

  7. #22
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    Quote Originally Posted by kur4o View Post
    Do you have the stock bin. I will make a list from it, what pids are supported for the OS, so you can log some extra things. There could be even some free 0-5v pins not used by your setup.
    That would be awesome! Bin right here:
    http://www.gearhead-efi.com/Fuel-Inj...ll=1#post79585
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

  8. #23
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    I finally figured why it is not working for you. Playing with some tools to see what actually tuner pro sends to the elm device.

    It looks like that the elm plugin supports only mode1 with the standard SAE pids.

    The 2 bytes pid are handled by mode 22 requests. I tried to reconfigure the tunerpro send message but couldn`t make it to work. It does change to mode 22 but when I try to extend the Pxxxx to 4 characters it just stops sending.

    For now you can log mode1 pids 00-1f, I hope someone can make it to work with mode22 so you can benefit with the extra data.

    Here is some good reading material I have on file.
    Attached Files Attached Files

  9. #24
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    Hmm. From all the other lists I've seen, O2b1s2 is 16 in hex, not 1146 or 15. Interesting. PID15 would still be within 00-1f. I can try 15 (M01P15S02R1).

    I wondered if that data just wasn't read because rear O2s are not used in my truck. I see some half tons used 8322 OS, and they have P10420 enabled where mine doesn't...but I don't see a place to "turn on" the rear o2 in my BIN.

    This weekend I tried moving the pin to the EGR and using that with no luck. Oddly enough, it also scaled perfectly with the speed for some reason... So I went back and noticed my WBO2 MACRO was right underneath the KPH MACRO in the MONITOR MACRO list. It was the 11th entry in the list. Maybe the ELM will only take 10 readings total and it just duplicated the 10th reading for the 11th? I deleted the STFT B1 MACRO and moved the WBO2 MACRO up in the list to see if that makes any difference. I'll find out tomorrow. Either way, I'll switch the wiring back to the o2b1s2 pin when I get a minute and try that out too. I'd really prefer that than killing my EGR.
    Last edited by woody80z28; 03-10-2020 at 06:50 AM.
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

  10. #25
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    Here is the list with all the pid available for the OS you have.

    Now since mode22 is likely not to work with elm plugin, why not reconfigure the data you can log with the standard pid 0-1a.

    It is to time to get some patches done for the ls1 pcm.

    This is the sae pids the pcm OS support

    Code:
    ROM:00001F64 dword_1F64:     dc.l $10200
    ROM:00001F68 off_1F68:       dc.l sub_454E8
    ROM:00001F6C                 dc.l $30100
    ROM:00001F70                 dc.l sub_454AE
    ROM:00001F74                 dc.l $40000
    ROM:00001F78                 dc.l sub_45458
    ROM:00001F7C                 dc.l $50000
    ROM:00001F80                 dc.l sub_45446
    ROM:00001F84                 dc.l $60000
    ROM:00001F88                 dc.l sub_4541E
    ROM:00001F8C                 dc.l $70000
    ROM:00001F90                 dc.l sub_453F6
    ROM:00001F94                 dc.l $80000
    ROM:00001F98                 dc.l sub_453CE
    ROM:00001F9C                 dc.l $90000
    ROM:00001FA0                 dc.l sub_453A6
    ROM:00001FA4                 dc.l $B0000
    ROM:00001FA8                 dc.l sub_4539A
    ROM:00001FAC                 dc.l $C0100
    ROM:00001FB0                 dc.l sub_4538E
    ROM:00001FB4                 dc.l $D0000
    ROM:00001FB8                 dc.l sub_45356
    ROM:00001FBC                 dc.l $E0000
    ROM:00001FC0                 dc.l sub_4532C
    ROM:00001FC4                 dc.l $F0000
    ROM:00001FC8                 dc.l sub_4531A
    ROM:00001FCC                 dc.l $100100
    ROM:00001FD0                 dc.l sub_4530E
    ROM:00001FD4                 dc.l $110000
    ROM:00001FD8                 dc.l sub_452F4
    ROM:00001FDC                 dc.l $120000
    ROM:00001FE0                 dc.l sub_452BA
    ROM:00001FE4                 dc.l $130000
    ROM:00001FE8                 dc.l sub_452B2
    ROM:00001FEC                 dc.l $140100
    ROM:00001FF0                 dc.l sub_45264
    ROM:00001FF4                 dc.l $150100
    ROM:00001FF8                 dc.l sub_4523A
    ROM:00001FFC                 dc.l $160100
    ROM:00002000                 dc.l sub_45210
    ROM:00002004                 dc.l $180100
    ROM:00002008                 dc.l sub_451C2
    ROM:0000200C                 dc.l $190100
    ROM:00002010                 dc.l sub_45198
    ROM:00002014                 dc.l $1C0000
    ROM:00002018                 dc.l sub_45190
    ROM:0000201C                 dc.l $1E0000
    ROM:00002020                 dc.l sub_45156
    ROM:00002024                 dc.l $210100
    ROM:00002028                 dc.l sub_45150
    The one that starts with $ is the pid number. The first 2 bytes is the pid number[zero missing] byte3 is config 0=1byte response,1=2bytes response.4th byte is not defined yet.

    I can repatch any of these pids to log what you want from the full list.
    The sub field under the pid is the subroutine where the value for the pid is taken.


    For the patch to work you will have to full flash the pcm.

    Make a list what you need from the extended pids and which ones from the sae list you don`t need and I will make a quick patch for logging.
    Attached Files Attached Files

  11. #26
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    Well, the back end is above my skill level, but let's make this happen!

    Needed as-is:
    $05 - Engine Coolant Temperature
    $06 - Short Term Fuel Trim Bank 1
    $07 - Long Term Fuel Trim Bank 1
    $08 - Short Term Fuel Trim Bank 2
    $09 - Long Term Fuel Trim Bank 2
    $0B - Manifold Absolute Pressure
    $0C - Engine RPM High Resolution (RPM x4)
    $0D - Speed in KPH
    $0E - Ignition Timing Advance
    $0F - Intake Air Temperature
    $10 - Mass Air Flow
    $11 - Throttle Position Sensor %
    $14 - O2 B1S1
    $15 - O2 B1S2 (for WBO2 0-1v)
    $18 - O2 B2S1
    $19 - O2 B2S2

    Wish list
    $119E - Air Fuel Ratio (this is target, right?)
    $11A6 - Knock Retard (which one?)
    $125D - Knock Retard (which one?)
    PID 2811 - EGR position 0-5v (not in your list, but referenced all over for use with wideband 0-5v)

    Excited to see what happens here! Thanks
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

  12. #27
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    I made a list what we can re purpose in the datastream.
    Sae pids
    $03 -2bytes
    $04 -1byte
    $12 -1byte -Air fuel target
    $13 -1byte -11a6 knock retard
    $16 -2byte -114b egr feedback[I will rip the 16bit data straight from the AD readings] stock have some filtering.
    $1c -1byte -1144 AC pressure switch[in case you want to log wideband through AC, or add second wideband]
    $1e -1byte


    SO we have 3 more pids left on the table. I will try to get a reading of gm/cyl reading used for table lookup, and the spark modifier[% blend between low and high octane table]

    So 1 more left. Will try to get the knock counter there but can`t promise. If you need more data at stage2 we can make use of the full sae range from 00-1f, but it will be more time consuming.

    2811 is not supported by the OS and I can`t find it anywhere in the datasheets I have. Could it be used for the can stuff.

  13. #28
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    I didn't see 114b in the list...that's probably the same wire as the "2811" that HPtuners calls EGR 0-5v.

    AC pressure also makes sense for wideband, although I read that's not usable until 03-07, which would be a different OS. Unless you can make this OS read it with an added pin?
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

  14. #29
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    I will try to get the patch done ASAP. I didn`t have much free time recently.

    Stay tuned.

  15. #30
    Fuel Injected! woody80z28's Avatar
    Join Date
    Nov 2011
    Location
    Walton, NY
    Age
    38
    Posts
    242
    Quote Originally Posted by kur4o View Post
    I will try to get the patch done ASAP. I didn`t have much free time recently.

    Stay tuned.
    Absolutely. Thanks again.

    I ran into a rocker panel replacement project on the wife's car to sell it. Body work takes forever when you're an amateur!
    80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
    91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
    94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
    96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
    01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
    https://www.youtube.com/c/GEARHEADdezign

Similar Threads

  1. TP-V5 W/Ostrich 93 Vette real time connecting problem.
    By Axman in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 07-16-2016, 04:57 AM
  2. how to start real time tuning?
    By Scrufdog in forum TunerPro Tuning Talk
    Replies: 14
    Last Post: 10-03-2014, 12:24 AM
  3. $42 VSS Filtering in REAL TIME SERVICE ROUTINE B
    By jim_in_dorris in forum GM EFI Systems
    Replies: 0
    Last Post: 08-16-2014, 09:12 AM
  4. Histogram viewing of xls files?
    By 1project2many in forum TunerPro Tuning Talk
    Replies: 4
    Last Post: 02-05-2012, 05:49 AM
  5. '427 Tuning ~ Excel vs TunerPro RT Histogram
    By dave w in forum GM EFI Systems
    Replies: 0
    Last Post: 10-29-2011, 04:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •