On further inspection, I think that both of those logs appear to be the same repeating pattern with only a few bytes changing. I think they might both be ALDL diag or idle chatter, I have no idea which.
I tried to format it in a way that looked right Here's a quick snippet:
Code:
0A 58 00 00 00 9E 0A 58 00 00 00 9E 0A 58 40 00 00 5E 05 5F 40 20 00 3C 81 00 00 02 00 01 7C 0A 58 40 00 00 5E F0 56 F4 C6
0A 58 40 00 00 5E 0A 58 40 00 00 5E 0A 58 40 00 00 5E 05 5F 40 20 00 3C 81 00 00 02 00 01 7C 0A 58 40 00 00 5E F0 56 F4 C6
0A 58 40 00 00 5E 0A 58 40 00 00 5E 0A 58 40 00 00 5E 05 5F 40 20 00 3C 81 00 00 02 00 01 7C 0A 58 40 00 00 5E F0 56 F4 C6
0A 58 40 00 00 5E 0A 58 40 00 00 5E 0A 58 40 00 00 5E 05 5F 40 20 00 3C 81 00 00 02 00 01 7C 0A 58 40 00 00 5E F0 56 F4 C6
0A 58 40 00 00 5E 0A 58 40 00 00 5E 0A 58 40 00 00 5E 05 5F 40 20 00 3C 82 00 00 02 00 01 7B 0A 58 40 00 00 5E F0 56 F4 C6
The first line begins with 0A 58 00 00 00 9E repeated twice and then 0A 58 40 00 00 5E once, all following lines begin with 0A 58 40 00 00 5E repeated three times.
Then all lines are 05 5F 40 20 00 3C.
Next byte varies between 81 and 84. (This might be voltage, 81-84 hex is 129-132 dec, using the x*0.1 conversion formula set in the A1.adx TunerPro definition that's 12.9-13.2 volts, which is exactly what TunerPro reports as the voltage while logging)
Then 00 00 02 00 01 on all lines.
Then between 7A and 7C.
And finally all end with 0A 58 40 00 00 5E F0 56 F4 C6.
Those two bytes are the only changes, which I assume are voltage readings and something else?
Bookmarks