Results 1 to 4 of 4

Thread: I think my computer might be bad.

  1. #1
    Electronic Ignition!
    Join Date
    Jun 2019
    Posts
    12

    I think my computer might be bad.

    Good morning, man am I at a loss. I am starting to think my computer is bad but am having trouble finding the right info to try to get a replacement. I'm looking for some help. I tried to find the bin number info in the search but it's saying not found. The engine is a 1992 tbi 454 with the 4l80e transmission 4x4 with a np241. The computer itself has a remanufactured replacement sticker on it. The computer had a Hypertech chip in it when I opened it up but have removed it trying to get the thing to work correctly. The blue cover on the factory chip says DELCO AXRB 2285. If a find a computer from a tbi 454/4l80 vehicle, would the assumption be it should work correctly? I have no functioning CEL, my trans is in limp mode, the rpms run high. CEL wires have continuity through to the computer. The trans plug has power and ground and all the wire have continuity to the computer. If I shove my figure in the iac hole in the tbi unit, the rpm's drop.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Link to 16147060 PCM information: http://www.gearhead-efi.com/Fuel-Inj...Information-85

    TunerPro RT not only data logs, it's an AWESOME SCAN TOOL at an affordable price!

    dave w

  3. #3
    Fuel Injected!
    Join Date
    Apr 2019
    Age
    43
    Posts
    54
    It would have to be from a 91-93 as the 4l80e controls were different in them than 94+. Have you tried checking the check engine light circuit with a test light to see if the ECM is commanding the light, but the cluster just isn't lighting up?
    1995 GMC K2500 SUBURBAN 2001 LB7 DURAMAX/ALLISON swap, mostly stock, tuned by me with EFILive

    1999 Tahoe 2 door 2X4, 5.7l with 0411 swap, and marine intake

  4. #4
    Carb and Points!
    Join Date
    Feb 2019
    Posts
    8
    I have similar set up (same trans, just a 502 with MPFI instead, I'm also having problems with a PCM from '85. I'm curious to see how this'll be solved.
    Best of luck!

Similar Threads

  1. new computer, TC not working.
    By freshda9 in forum GM EFI Systems
    Replies: 5
    Last Post: 04-02-2015, 07:42 PM
  2. GM MEFI Computer / Crate 502 Engine Computer
    By dave w in forum OBDII Tuning
    Replies: 29
    Last Post: 04-29-2014, 11:53 PM
  3. Is my computer shot?
    By volkerc in forum GM EFI Systems
    Replies: 40
    Last Post: 06-06-2013, 12:13 AM
  4. need computer
    By cooterb78 in forum Buy - Sell - Trade - Wanted
    Replies: 2
    Last Post: 03-28-2013, 06:40 PM
  5. New computer, got questions
    By JeepsAndGuns in forum Gear Heads
    Replies: 9
    Last Post: 01-06-2013, 02:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •