Results 1 to 5 of 5

Thread: Finished my tune....how do i put it on a chip?

  1. #1
    Carb and Points!
    Join Date
    May 2012
    Age
    30
    Posts
    3

    Finished my tune....how do i put it on a chip?

    hey everyone, i have a 95 s10 with a tbi 350....pcm #16197427....i downloaded a bin and tuned it using moates autoprom and tunerpro rt...but i cant figure out how to take the tune and put it on a chip

  2. #2
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    The man who says something is impossible, is usually interrupted by the man doing it.

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Then in TunerPro click on Tools and Moates Prom I/O. Erase chip, check blank, Load bin to buffer, program chip, verify chip with buffer. All that takes about 30 seconds when you get used to it.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  4. #4
    Carb and Points!
    Join Date
    May 2012
    Age
    30
    Posts
    3

    thanks

    worked great...thanks for the help

  5. #5
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Good! Now hang around and help!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •