HELP CHEVY CAPRICE L99 TROUBLE CODES

[mastermind]

Greetings forum, I not long registered and poorly understand on-English. Today I decided to diagnose my car- chevy caprice 94 l99 through the eehack program and got 3 errors in the main body:

ECM TROUBLE CODES:
MALF43A (MALF 43A ACTIVE)
ERR43 (ESC FAILURE)
ERR95 (OIL LIFE LAMP CIRCUIT FAULT)
further I saw in diag that there is no information on 47 components and was in of shock !(see photo).I also want to say that there is no EGR, it is completely removed, 2 fans work and the check is lit. Guys write, I want to cut the EGR out of the brain machine, just don't know how, please help me!
2ac68b324134.jpgda16d0fffcc6.png

[NomakeWan]

The “No Data” in the Diag tab is because you have not enabled the tab. While connected, click either the “Stream” or “Snapshot” buttons on the right side of the screen to request the data for that screen. Since these are just error codes, “Snapshot” should work just fine.

ESC Failure is likely because the resistor in one or both of your knock sensors has failed. You can either create a BIN for your vehicle that disables this error code using TunerPro, or you can replace the knock sensors. 99% of the time this error does not actually mean the knock sensor has failed, but just that the detection circuit has failed. It is up to you how you want to solve it.

Oil Life Lamp Circuit Fault is easy, Check to make sure the bulb is not blown for the “CHANGE OIL” light.

Good luck.

[Terminal_Crazy]

Hiya
I've had the ERR43 & MALF43A codes on my '95 Z28 occur when the headers melted the knock sensor cables.
Very intermittant and hard to diagnose as cables all test OK.

HTH
Mitch

[mastermind]

Do you mean that you had normal knock sensors, wiring problems?
*
Who can write how to remove egr or these sensors, who has stable firmware for l99 94!

[steveo]

Do you mean that you had normal knock sensors, wiring problems?
*
Who can write how to remove egr or these sensors, who has stable firmware for l99 94!

what language do you speak? maybe someone here can help translate for you

we call firmware 'bin'

you have stable firmware already. flash -> download bin from ECM

if you want to remove EGR or knock sensors use tunerpro. use eex definition from my site.

http://fbodytech.com/eex-tunerpro-definition/

[Terminal_Crazy]

Do you mean that you had normal knock sensors, wiring problems?

Sensors were new. cables tested ok. Knock circuit tested ok many times.
The cables were occasionally rubbing on the frame causing a short.

HTH
Mitch

[mastermind]

Guys, and anyone has a good and qualitative firmware on l99 caprice?

[NomakeWan]

We keep trying to tell you that you already have it. Download the BIN from your L99 Caprice, then modify it yourself using the free program TunerPro.

Or upload the BIN file here and I can make the changes for you to disable the errors.

[mastermind]

The weird thing is the car goes in full yourself

[mastermind]

Guys, no one knows how to remove errors on air bag ? There was an accident, the airbags and sensors were changed, but now the air bag is on fire.

[kur4o]

Change the airbag module. If the airbags were deployed the error is hard coded and can`t be cleared.

[mastermind]

Well, I have a module from 93 years, how do you think it will fit?