Need advice on LT1 PCM

[johnny_b]

The files posted in that thread by 06lt4c4 are the exact ones I used.

I suspected it might be the cable. I use a moates aldl to usb with a homemade bench top harness that plugs into pcm. However when I plug this exact setup into another pcm it connects right away without issue. So I don’t think it’s the cable or homemade harness

[johnny_b]

Copy and paste from the debug:

Loading Definition DEVICE=0xF4 MSG=0x0
Loading Definition DEVICE=0xF4 MSG=0x1
Loading Definition DEVICE=0xF4 MSG=0x2
Loading Definition DEVICE=0xF4 MSG=0x3
Loading Definition DEVICE=0xF4 MSG=0x4
Loading Definition DEVICE=0xF4 MSG=0x5
Loading Definition DEVICE=0xF4 MSG=0x6
Loading Definition DEVICE=0xE4 MSG=0x0
Loaded 1014 elements into 8 definitions.
VERSION re-checking, network went online!
VERSION offline status, skipping versioning
Using monotonic reference clock.
EEHack Version 4.70
Current OS : Windows 10
Built with THROTTLE_MS=2
Opened serial port COM5 Description USB Serial Port MFR FTDI
START SILENCE ROUTINE
SERIAL: WAITED_TOO_LONG in serial_read_packet
SERIAL: No echo! (Serial interface problem..?)
SERIAL: WAITED_TOO_LONG in serial_read_packet
SERIAL: No echo! (Serial interface problem..?)
START SILENCE ROUTINE
SERIAL: WAITED_TOO_LONG in serial_read_packet
SERIAL: No echo! (Serial interface problem..?)
SERIAL: WAITED_TOO_LONG in serial_read_packet
SERIAL: No echo! (Serial interface problem..?)
START SILENCE ROUTINE