Also too the pcm has a bin file 16209991. I check the vin on gm’s website and it said this was the correct calibration file. I couldn’t locate this cal in Steveo’s bin library and searches turned up nothing
Also too the pcm has a bin file 16209991. I check the vin on gm’s website and it said this was the correct calibration file. I couldn’t locate this cal in Steveo’s bin library and searches turned up nothing
are you sure its an lt1? thats a weird cal id. are you sure its not an l99 4.3
I thought it was odd when I saw it. 4.3 or EEX was the first thing that came to mind but the VIN pulls up a 94 Camaro
"set it to manual with the checkbox at 2026 $40 bit." Im not sure how to do that
I scored a stock bin for you. It is also set for manual now. Check your gears, this one is for 2.73 final ratio.
The checkbox is located in the automitic transmission tab in eextra
Thanks I appreciate that
Would there be a problem using the auto bin with the codes disabled for everything but the TCC? I'd think that would allow the PCM to still control the TCC once you wired the TCC to the PCM.
i remember trying that and the auto trans code is so intense that it persistenly threw errors and wouldn’t actuate the tcc
however that way WAY before ee was so well understood.
... if we mange to find the best way to run a cable driven trans with EE please let me know and i’ll post a bin on my site as its been a challenge before
Bookmarks