I thought it was odd when I saw it. 4.3 or EEX was the first thing that came to mind but the VIN pulls up a 94 Camaro
"set it to manual with the checkbox at 2026 $40 bit." Im not sure how to do that
I thought it was odd when I saw it. 4.3 or EEX was the first thing that came to mind but the VIN pulls up a 94 Camaro
"set it to manual with the checkbox at 2026 $40 bit." Im not sure how to do that
I scored a stock bin for you. It is also set for manual now. Check your gears, this one is for 2.73 final ratio.
The checkbox is located in the automitic transmission tab in eextra
Thanks I appreciate that
Would there be a problem using the auto bin with the codes disabled for everything but the TCC? I'd think that would allow the PCM to still control the TCC once you wired the TCC to the PCM.
i remember trying that and the auto trans code is so intense that it persistenly threw errors and wouldn’t actuate the tcc
however that way WAY before ee was so well understood.
... if we mange to find the best way to run a cable driven trans with EE please let me know and i’ll post a bin on my site as its been a challenge before
The main obstacle will be that the pcm doesn`t know on which gear the trans is, and there is no way to get it. Patching that will be really too much work with no clear results.
I just got the idea to just skip all the trans stuff and use the mph input to set a new table to lock the tcc just using the speed input and force unlock at certain conditions like brake apply. It might lock rough as hell but will work good as long as we have valid inputs for mph and brake switch. The switch bit for the tcc is well known and won`t hard to reconfigure at all.
I will need a guinea pig for this.
Bookmarks