AutoProm ADC Interface Channels Set up in TunerPro!

[wsherrard]

I may have missed it and this may be a dumb question but... is all this the same for the LM-2?

[woody80z28]

Ok, I found this how-to on the Moates site that shows the old Firewire adapter.
http://static.moates.net/zips/wideba...nerpro_lm1.pdf
The 0.3gain is to use 0-12v inputs (I don't know why I didn't think of that.) So I put on 1x gain, but it's still not working. Checked the leads from the wideband with a multimeter and they are correct. I set up my ADX to read AFR, V and raw # for the 3 packets and swapped the wires all over and it's nowhere near accurate at any of them.
I found a replacement Firewire deal on Moates, but I'm wondering if there's any way to check if it's the adapter or the Autoprom itself. Any idea?
http://www.moates.net/apadc-ad-conne....html?cPath=64

[woody80z28]

I forgot to update this with a fix. I got some support from Dave at Moates. He said those adapters never go bad, and he has never seen issues with the input channels on an Autoprom that didn't have a bunch of other problems. He took a look and my problem was the "body size" in the ADX I downloaded. It was 66 and should have been 67.