Quote Originally Posted by steveo View Post
you can use the user parameters on the bottom right of the dashboard to display four of them if you like. when the transmission message is streaming they’ll display.
Steveo,

Thanks, I did try to use the user parameters. I wanted to add the TCC/BRAKE Switch to troubleshoot a TCC issue. However, since it is not shown in the configurable data choices I have to use extended data on the Main page to see it. The program is very good overall. I know most people are using it for tuning the engine instead of troubleshooting transmission issues. It would be great to have the TCC/BRAKE Switch shown in the Dash board under actuators or to be able to choose switches in the user parameter section. ;)

Thanks

mdavidthomas1968