Tunerpro RT and $EEHack Transmission datastream datalogging

[mdavidthomas1968]

I have searched these forums and have been able to find very little information on datalogging the transmission information in either of the programs listed above.&nbsp; Can anyone point me in the correct direction?&nbsp; In a related question, Tunerpro RT shows which gear is manually selected but I don't see an entry for actual gear.&nbsp; In $EEHack 4.70, the base Dash shows Transmission current gear and TCC lockup.&nbsp; Is $EEHack 4.70 calculating the current transmission gear using the Solenoid A and Solenoid B and current manually selected gear to determine the current transmission gear?&nbsp; Is this current gear option available in TunerPro RT in the standard datastream?&nbsp; Also, $EEHack doesn't seem to show the TCC/Brake Switch input unless I have overlooked this.&nbsp; I also tried looking through User Parameters but didn't see any pcm inputs.<br><img src="http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=14759&amp;stc=1" attachmentid="14759" alt="" id="vbattach_14759" class="previewthumb"><br><br>Thanks,<br><br>mdavid thomas