Results 1 to 2 of 2

Thread: Hello fellow enthusiast

  1. #1
    Carb and Points!
    Join Date
    Sep 2019
    Age
    52
    Posts
    1

    Hello fellow enthusiast

    I have made my way from the darkside. Since the Ford is down, I needed a tow vehicle. It's a GMC Yukon. Driveway engineer video gave pretty decent instructions on pulling the bin and tuning it. Enter someone else's monkey wrench. The ecu has been locked. OS is 12589250 and I cannot find an xdf. So if I force unlock it and extract the bin, I'll need to re-flash the OS as well as the bin. Any insight would help as this is new to me. The verbiage is much different from fords and audis. Concepts the same.

  2. #2
    Carb and Points!
    Join Date
    Dec 2020
    Location
    Wilson North Carolina 27893
    Age
    66
    Posts
    4

    Cool

    I need info on building a bench harness, i need the pinouts fo a 2000
    Saturn ls 3.0 ecm.




    I guess i failed too i haven't got a reply, maybe i will learn.
    Last edited by koekeemoe1; 01-01-2021 at 03:54 AM.

Similar Threads

  1. Hello fellow Gearheads
    By padrecruiser in forum Introductions
    Replies: 0
    Last Post: 09-08-2017, 09:58 PM
  2. Another Enthusiast here!
    By r.e.c.enthusiasts in forum Introductions
    Replies: 1
    Last Post: 05-13-2017, 03:06 AM
  3. Hello fellow gearheads!
    By Jetmutant in forum Introductions
    Replies: 2
    Last Post: 06-26-2014, 06:02 AM
  4. hey fellow gearheads
    By sciroc in forum Introductions
    Replies: 5
    Last Post: 03-04-2014, 03:30 PM
  5. fellow gearhead from ky
    By Aholt91ss in forum Introductions
    Replies: 2
    Last Post: 02-08-2013, 08:44 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •