Results 1 to 2 of 2

Thread: Disabling DTCS

  1. #1
    Carb and Points!
    Join Date
    Sep 2019
    Age
    36
    Posts
    7

    Disabling DTCS

    first time using tunerpro to edit a bin, and i'm looking to disable the DTC's for rear o2s egr etc etc, when i look at the tooltip it shows 0,1,2,3 for values, but i've got everything from 0-255 in the actual cells, and some dtc cells are missing entirely. any advice would be helpful, using the version 5 xdf for 12202088 and OS 12212156 if that helps at all.

    also looking for info on how to change the transmision type, as the tooltip for it says ***this parameter shouldnot be changed*** and i need to change from a 4l60e to a manual

  2. #2
    Carb and Points!
    Join Date
    Sep 2019
    Age
    36
    Posts
    7
    well nvm i'm an idiot. the 12202088 xdf doesn't fully define the 1221256 os calibration. now to figure out how to change to a manual trans

Similar Threads

  1. Disabling Checksum
    By wanderingturtle in forum TunerPro Tuning Talk
    Replies: 3
    Last Post: 08-01-2017, 05:36 AM
  2. Disabling PE to tune 100kPa cells
    By 90Vette in forum GM EFI Systems
    Replies: 6
    Last Post: 06-03-2017, 09:23 PM
  3. Disabling traction control in '95 Fleetwood LT1
    By FUN-9C1 in forum GM EFI Systems
    Replies: 8
    Last Post: 04-22-2016, 04:11 AM
  4. Disabling PE Mode in $4E
    By S10Sanity in forum GM EFI Systems
    Replies: 1
    Last Post: 02-02-2015, 12:49 AM
  5. Disabling Checksum
    By POZE in forum GM EFI Systems
    Replies: 7
    Last Post: 01-14-2013, 06:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •