So i recently bricked my pcm in my 95 z28. I was having driveabilty issues and reflashed the stock tune into it to see if it was the problem. Ended up being a opti issue. So i went to reflash my tune into the pcm and it is now a brick. During the flash it had numerous errors on the first side went it went to flash the other side it didnt take. it showed code 13. Then it wouldnt start and the were on. I went to the junk yard and found a 95 z28 pcm. Installed it and fired right up. I connected eehack up to it and there are numerous errors over 170 of them inside of 3 minutes. Could this be the aldl cable or some other module messing with the network? I need to put my tune back in cause this car is lazy now