Results 1 to 5 of 5

Thread: Help needed LS6.0 to 700r4 which .bin .xdf

  1. #1
    Carb and Points!
    Join Date
    Aug 2019
    Age
    53
    Posts
    8

    Help needed LS6.0 to 700r4 which .bin .xdf

    Hi Guys, I have managed to the the Bin file from my PCM a OS 12212156 which came with the LS 6.0 Engine I got from a scrap yard.

    I also got the .xdf file for the 2002 GM Vehicle in this thread.

    The original transmission is showing as a 4L80E but I want to use my 700R4 as this has very recently been fully rebuilt.

    The 6.0 LS will be going into my 1989 GMC Vandura G2500 Van.

    Am I able to just change to transmission type and then save or is it more complicated? to I need to change other settings aswell.

    I need to delete VATS
    EGR
    Cooling fans
    Probably the Speedometer section with wheel size etc.
    Maybe the 02 Sensors aswell. (still reading up on whats needed).

    Many thanks.

  2. #2
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by SapperRE View Post
    Hi Guys, I have managed to the the Bin file from my PCM a OS 12212156 which came with the LS 6.0 Engine I got from a scrap yard.

    I also got the .xdf file for the 2002 GM Vehicle in this thread.

    The original transmission is showing as a 4L80E but I want to use my 700R4 as this has very recently been fully rebuilt.

    The 6.0 LS will be going into my 1989 GMC Vandura G2500 Van.

    Am I able to just change to transmission type and then save or is it more complicated? to I need to change other settings aswell.

    I need to delete VATS
    EGR
    Cooling fans
    Probably the Speedometer section with wheel size etc.
    Maybe the 02 Sensors aswell. (still reading up on whats needed).

    Many thanks.
    You need a file from a matching operating system that has the transmission file you intend on running. I usually segment swap the mechanical automatic trans segment from a a 2002 8.1 school bus with an Allison AT545.

  3. #3
    Carb and Points!
    Join Date
    Aug 2019
    Age
    53
    Posts
    8
    Hi thanks. I'm not familiar with the Allison AT is it also a non electronic?

  4. #4
    Fuel Injected!
    Join Date
    Dec 2013
    Posts
    87
    Just disable all the transmission DTCs, it will run fine with you mechanical transmission and current motor.

  5. #5
    Carb and Points!
    Join Date
    Aug 2019
    Age
    53
    Posts
    8
    OK I'll give it a go

Similar Threads

  1. 12200411 set up for 700R4
    By EagleMark in forum OBDII Tuning
    Replies: 28
    Last Post: 04-17-2019, 05:32 PM
  2. Replies: 13
    Last Post: 02-05-2019, 10:13 PM
  3. 7427 MAF 700R4 BIN Help
    By halljam70 in forum GM EFI Systems
    Replies: 15
    Last Post: 01-12-2016, 05:31 AM
  4. 16197427 and a 700R4 ?
    By EagleMark in forum GM EFI Systems
    Replies: 57
    Last Post: 10-21-2012, 02:18 PM
  5. 454 / 700r4
    By Nasty-Z in forum GM EFI Systems
    Replies: 4
    Last Post: 05-04-2012, 02:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •