Heads are back from the shop. New stainless valves, new locks and retainers, comp springs, 3 way valve job.
I also opted for the Flex-A-Lite 280 Monster fan.
Spent a day or so getting wiring for that all tied in to the AUX Fan circuit for A/C activation as well as a manual override and thermostat control.
I will begin assembly today and hopefully get most of it done by this weekend.
I was able to pull the stock BIN from the factory MEMCAL and also the “TBICHIP” bin file.
The VE tables are totally different and I will begin with the factory table and data log and adjust using BLM.
I got the EGR turned off per some guidance I found on this site. Still looking for the right way to shut down the CCP as I have removed and vented the tank externally. Also wondering if I need to turn off the CAT Overheat as they are long gone.
Any advice for my baseline adjustments to fire her off?
Bookmarks