Results 1 to 15 of 33

Thread: GM TBI Injector size, color and part numbers

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 09-26-2011 #1
    corvairnut
    corvairnut is offline
    Fuel Injected! corvairnut's Avatar
    Join Date
    Sep 2011
    Age
    62
    Posts
    72

    Re: GM Injector size, color and part numbers

    Ive been looking for the flow rates for the TBI-700. These TBIs were used on the 2.0 and 2.2 GMs. Im running dual TBI-700s on a Chev Corvair controlled by a 6395 ECM, but guessed at the flow.

    Thanks
    Ted Brown
    Anderson, SC
    68 Corvair EFI
    61 Corvair Loadside Pickup (Future EFI)
    Reply With Quote Reply With Quote
  2. 02-18-2014 #2
    Red
    Red is offline
    Carb and Points!
    Join Date
    May 2013
    Posts
    1
    What about the injectors found in the 2.5L Iron Duke TBIs (single barrel)? I can't seem to find their specs anywhere. I'm using one to inject an Opel 1.9L.

    http://www.rockauto.com/catalog/more...757&cc=1060894
    Reply With Quote Reply With Quote
  3. 02-18-2014 #3
    jim_in_dorris
    jim_in_dorris is offline
    Fuel Injected! jim_in_dorris's Avatar
    Join Date
    Dec 2011
    Posts
    803
    I'm holding a 5235203 injector, blue/yellow color markings anybody know what that is?
    Square body stepsides forever!!!
    Reply With Quote Reply With Quote
  4. 02-18-2014 #4
    damanx
    damanx is offline
    Fuel Injected!
    Join Date
    Feb 2013
    Posts
    463
    Quote Originally Posted by jim_in_dorris View Post
    I'm holding a 5235203 injector, blue/yellow color markings anybody know what that is?
    4.3 injectors.
    Reply With Quote Reply With Quote
« Help data | how do you tell TBI injectors apart? I'm lost and even have a pic »

Similar Threads

  1. Injector size vs HP = pressure math needed
    By EagleMark in forum GM EFI Systems
    Replies: 24
    Last Post: 03-18-2012, 04:27 PM
  2. Injector Pulsewidth
    By gregs78cam in forum GM EFI Systems
    Replies: 9
    Last Post: 07-13-2011, 08:14 AM
  3. Mr Injector and flow rates
    By EagleMark in forum Gear Heads
    Replies: 6
    Last Post: 05-03-2011, 09:27 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules