[QUOTE=dave w;83926]As a ballpark adjustment for the throttle blade opening, try adjusting the throttle blade opening by pulling a strip of paper about 1/2" wide x 4" long through the throttle blade opening. The paper strip should have a slight drag when pulled through the throttle blade opening.
Note, paper thicknesses will vary depending on the paper. I use a common 20 lb paper, not 16 lb (to thin) or 24 lb (to thick).
dave w
Thanks Dave, I will give that a try.... but I bet I will be 900+Rpm and IAC count 40+
Bookmarks