Results 1 to 7 of 7

Thread: WB to Blue Tooth Adapter

  1. #1
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98

    WB to Blue Tooth Adapter

    I am a little confused about hooking up my AEM WB to the 1320 electronics Blue Tooth adapter to data log, Do I use the Blue wire serial output or the White Wire 0-5v output, I know I need to hook one or the other to the RJ-45 cable but witch one for data logging this way. Thanks For any help.

  2. #2
    Fuel Injected!
    Join Date
    May 2014
    Posts
    54
    0-5v output to pon 1 of the rj 45 connector and you should be good to go.

  3. #3
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Quote Originally Posted by 1320_john View Post
    0-5v output to pon 1 of the rj 45 connector and you should be good to go.
    Thank You Hopefully I will have some time this week to play around with it.

  4. #4
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Still no luck, I measured 1-5v on the white wire from the WB and hooked it to the orange white wire on the RJ-45 cable I have. I am assuming that the data should show on one of the AD Chanel's under ALDL Scan but I am not seeing anything. Is there some where else I should be looking. other than that the unit works very well, heres a very short log https://drive.google.com/file/d/0B5d...ew?usp=sharing

  5. #5
    Fuel Injected!
    Join Date
    May 2014
    Posts
    54
    Set switches to 1 and 3 up, 2 and 4 down. That should get you there.

  6. #6
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Quote Originally Posted by 1320_john View Post
    Set switches to 1 and 3 up, 2 and 4 down. That should get you there.
    Thanks I will give it a try.

  7. #7
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    Quote Originally Posted by 1320_john View Post
    Set switches to 1 and 3 up, 2 and 4 down. That should get you there.
    That worked, Big Thanks.

Similar Threads

  1. Newbie question regarding Red/Blue PCMs
    By 57 Handyman in forum GM EFI Systems
    Replies: 56
    Last Post: 11-30-2017, 06:11 AM
  2. red devil blue tooth problem
    By Dom in forum GM EFI Systems
    Replies: 22
    Last Post: 10-12-2017, 04:48 AM
  3. 7730 ecm 40 tooth tone ring
    By misterpat in forum GM EFI Systems
    Replies: 9
    Last Post: 05-13-2017, 03:04 AM
  4. Red/blue connectors
    By myburb in forum GM EFI Systems
    Replies: 0
    Last Post: 10-17-2015, 04:56 AM
  5. 40 tooth vss sensor gap/clearance
    By JeepsAndGuns in forum Gear Heads
    Replies: 7
    Last Post: 01-07-2015, 03:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •