Results 1 to 7 of 7

Thread: GMPP ls376/480 file

  1. #1
    Carb and Points!
    Join Date
    Jul 2018
    Posts
    2

    GMPP ls376/480 file

    Hello, I'm looking for a GM LS3 file. GMPP LS376/480 or the LS376/525 file. Need a baseline to compare to my tune. Thanks.

  2. #2
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Here ya go, from memory the 480hp cal doesn't have the RPM limiter active and appears to be an error. These are from 2012 so there could be updated stuff by now.

    p.s. From memory, the original files have the checksums disabled. I think I have the checksums corrected in these files.

    -Carl
    Attached Files Attached Files
    Last edited by In-Tech; 07-14-2019 at 09:00 PM.
    -Carl

  3. #3
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271

  4. #4
    Carb and Points!
    Join Date
    Jul 2018
    Posts
    2
    Thanks, In-Tech Carl and roughneck427. I very much appreciate it, I can compare and see where my tune is at.
    Last edited by 57tech; 07-18-2019 at 03:02 AM.

  5. #5
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Glad to help, roughneck is local to me and is a huge asset as a friend, especially when I get the Ford phone calls I usually stick with GM stuff or aftermarket, occasionally get a repeat customer who needs some Ford stuff and I want to publicly thank roughneck for the help :)

    I have a really good customer who just bought a 525 crate so when I read it I will post the latest when I can.

    -Carl
    -Carl

  6. #6
    Fuel Injected!
    Join Date
    Dec 2013
    Posts
    87
    Are all those files E67 controller only?, if yes how to know what Serv. No.?

  7. #7
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    All of them I have done have been E67 and now that you mentioned it, I will pay more attention and take pics of the back.

    I mentioned that all of them have the checksums disabled so, what that tells me is they are real-time programmable. One day I'll figure that out, truly all it takes is to be able to write to ram cuz that is really where it lives when the engine is running. I haven't had time to research but I bet it is very similar to Mefi5 which would open up a lot of doors.
    Last edited by In-Tech; 07-20-2019 at 07:04 AM.
    -Carl

Similar Threads

  1. WTB: GMPP TBI / Vortec Intake Manifold
    By devind in forum Buy - Sell - Trade - Wanted
    Replies: 27
    Last Post: 06-18-2017, 01:36 AM
  2. Building a LT1 $EE ADS file from ALDL DS file?
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 51
    Last Post: 12-24-2011, 02:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •