Results 1 to 3 of 3

Thread: hey guys' need help picking a stock .bin for my truck

  1. #1
    Fuel Injected!
    Join Date
    May 2019
    Location
    Canton Georgia
    Age
    57
    Posts
    24

    hey guys' need help picking a stock .bin for my truck

    its a 1993 3500 Chevrolet 4 door 2wd 16147060 bamp was the stock .bin and it was terrible,wouldnt pull itself..

    truck won't be towing anything other than maybe a car trailer with a nomad on it..

    I found these in this thread by six shooter and eagle mark http://www.gearhead-efi.com/Fuel-Inj...Information-85

    I just wasn't sure enough to pick the best one for towing,any safe suggestions till I get familiar enough with tuner pro to do it myself?

    Just didn't want to hurt it,with detonation(especially if I let my dad pull his boat with it),till I am able to make my own.....

    The 454ss stock one runs good, but shifts pretty hard, and looks like it has a lot more timing in it than a tow beast should prob have.



    thanks for any suggestions

    mike454
    Last edited by mike454; 07-02-2019 at 07:46 PM.

  2. #2
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    I glanced at that thread and I think all of those are stock .bin files. I wish I had a hopped up 87 octane tune for ya but all of the 7060 stuff I have done had a whipple on it. There's the one 496 edelbrocked headed one I did but I don't think that will help you. Hopefully one of the other guys has something for you. When you get into tuning and have questions I am sure many will jump in to help.
    -Carl

  3. #3
    Fuel Injected!
    Join Date
    May 2019
    Location
    Canton Georgia
    Age
    57
    Posts
    24
    Thank you In-Tech.
    As I learn more,i do have a 91 1500 that I put all the 454ss running gears in that was wrecked.
    It has Edelbrock heads and the rest of the Edelbrock” mpfi kit” on it.
    I read the Edelbrock chip and looked at it and it looks strange. I definitely want to learn by tweaking on it.
    It should run much better than it does.
    Last edited by mike454; 07-03-2019 at 04:04 PM.

Similar Threads

  1. Stock 95 TBI truck cam specs?
    By joegreen in forum Gear Heads
    Replies: 2
    Last Post: 03-05-2017, 07:30 AM
  2. Hello guys!!!
    By jayyk31 in forum Introductions
    Replies: 0
    Last Post: 02-06-2017, 01:48 PM
  3. Hey guys!
    By Too Fast in forum Introductions
    Replies: 1
    Last Post: 03-24-2015, 06:59 AM
  4. Stock computer/Stock tune Datalogging?
    By rstroh in forum GM EFI Systems
    Replies: 16
    Last Post: 03-07-2015, 04:46 AM
  5. hi guys
    By rcfranco79 in forum Introductions
    Replies: 1
    Last Post: 05-29-2014, 09:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •