Page 3 of 3 FirstFirst 123
Results 31 to 34 of 34

Thread: spark advance

  1. #31
    Fuel Injected!
    Join Date
    Sep 2018
    Posts
    101
    Hi,
    it seems you were right.I moulded the cables with wire mesh and grounded this. I remember we had this on gasoline driven cars in the army. At first glance (had no time to drive it) it looks good.
    Attached a view pictures
    Attached Images Attached Images

  2. #32
    Fuel Injected!
    Join Date
    Mar 2019
    Location
    Camarillo, CA
    Age
    47
    Posts
    82
    I hope that does it! Looking forward to hearing about it after you drive it.

  3. #33
    Fuel Injected!
    Join Date
    Sep 2018
    Posts
    101
    Hello, up to now its running without spikes in ignition.Here is how i did the isolation.
    First i had a used water hose from the plummer.

    next I cut both ends

    when you press the mesh together you can easily pull out the inside.

    Put a piece of a round wood inside the mesh, then you can put on some solder to the mesh.
    next post!
    Attached Images Attached Images

  4. #34
    Fuel Injected!
    Join Date
    Sep 2018
    Posts
    101
    solder a piece of wire to the mesh, it will be the earth point.
    put some shrinking tube on the mesh
    put the cable inside the mesh
    shrink the shrinking tube on the ends of the mesh
    reddy cable
    build in with earth point
    Attached Images Attached Images

Similar Threads

  1. Spark Advance
    By Yellow Camaro in forum TunerPro Tuning Talk
    Replies: 3
    Last Post: 02-09-2018, 08:21 PM
  2. Spark Advance Max
    By eutu1960 in forum GM EFI Systems
    Replies: 0
    Last Post: 09-20-2016, 01:11 AM
  3. Replies: 4
    Last Post: 07-30-2016, 04:27 PM
  4. Replies: 0
    Last Post: 06-14-2016, 07:28 AM
  5. 23,000 degrees spark advance!
    By CDeeZ in forum GM EFI Systems
    Replies: 5
    Last Post: 08-07-2012, 01:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •