spark advance

[mecanicus]

Hi everybody,
is there a tool like trimalyzer for the spark advance table?

I could convert my amc 304 engine to tbi.When I used the original spark advance table from BPSA.bin the car didn`t run right. I have set the table according to the spark advance curves from the jeep-manual. Now it runs good when rpm is higher than 2000.At lower rpm and when accelerating i have to do that very smooth otherwise engine is bogging and trends to stall.I raised up spark advance in lower rpms slightly but no success up to now. When I take an other bin (bhmc) from a 5ltr engine, engine will not accelarate at all.
Attached my last logfile where ve tables are not yet set by trimalizer.