I must be dense lol - I simply can't find where to read MALF Codes.

[alv]

Greetings,
I am new to tuning,TunerproRT and the scene.
That said I have read the intro documentation posted in the stickies and read some posts on this topic but I am missing something. How do I display the trouble codes?

1988 corvette, 5.7 DN 4+3, 1227165 ecm, using registered TunerproRT, 32B adx for data logging.
I don't see the buttons with D,F,V,M, but do see the data list default but cannot find the option to read the Malf codes..

Thanks

AL

[PlayingWithTBI]

Go to Acquisition/Show Data List then click on the drop down box there and select "Error Codes"

[alv]

Thanks for the follow up.. when I try that no other options are present. Could it be possible that it’s not supported or available in the ADX I’m using?

[PlayingWithTBI]

Probably, maybe someone else can help you with the right adx file?

[alv]

I hope so. I just looked at the ironduke adx and it seems to have the malf codes in the configuration file. If anyone has a definition file for an 1988 GM y body please share. In the mean time I’ll look at the 6e adx next.

Thanks!

[steveo]

wow that 32B definition really sucks

yet another one-year ecm that nobody has put time into

i guess for the time being you can flash your error codes with the ol' paperclip trick and get the rest of your data with that adx file.

i had a look and that's one of the old ecms that does both 160 baud and 8192 baud (with extra info in the 8192 baud mode). look how many parameters your ADX is missing... if i were you i'd write your own ADX. takes a bit of work and experimentation but the results are worth it. that ECM isnt so bad for its age

all the info you'd need is here: http://www.gearhead-efi.com/gearhead...f/aldl/A028.DS