Results 1 to 12 of 12

Thread: Tunercat Tune Review?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Electronic Ignition!
    Join Date
    Mar 2019
    Age
    35
    Posts
    15

    Tunercat Tune Review?

    Hi, I figured out my problem with my 0411 PCM swap and i am now required to pump the throttle during start up in order to get it to fire and have to feather the throttle for a few seconds in order for the idle speed to stabilize. It is also pulling ~12% fuel, but i imagine thats not a huge issue due to the adaptive learning. I know its a tuning issue because on the black box the engine would operate perfectly. Engine was fully rebuilt by me and has the following:
    gen vi 454 bored .030"
    heads milled .010"
    Intake valves back cut
    Comp cam: .510 lift, 212/218 duration @ .050, 113 LSA
    fuel injectors are 0280155715 EV6 rated at 24lbs at 3 bar (my system is running 4 bar)
    EGR removed

    Would someone be willing to look at the tune file for me and see what they see? Maybe make recommendations on what to adjust? Thanks.
    Attached Files Attached Files

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,308
    Quote Originally Posted by Aznpersuasion89 View Post
    Hi, I figured out my problem with my 0411 PCM swap and i am now required to pump the throttle during start up in order to get it to fire and have to feather the throttle for a few seconds in order for the idle speed to stabilize. It is also pulling ~12% fuel, but i imagine thats not a huge issue due to the adaptive learning. I know its a tuning issue because on the black box the engine would operate perfectly. Engine was fully rebuilt by me and has the following:
    gen vi 454 bored .030"
    heads milled .010"
    Intake valves back cut
    Comp cam: .510 lift, 212/218 duration @ .050, 113 LSA
    fuel injectors are 0280155715 EV6 rated at 24lbs at 3 bar (my system is running 4 bar)
    EGR removed

    Would someone be willing to look at the tune file for me and see what they see? Maybe make recommendations on what to adjust? Thanks.
    Attached is a Stock 2002 Express Van 5.7 liter with 4L80E .cal file.
    Also attached is the "Compare" summary .txt file.

    The Express Van will have a different gear ratio and tire size, so the transmission shift parameters will be very different.

    I wonder if the attached 5.7 flash, which has VATS Disabled, is worth trying? Sometimes, tuning requires starting from a different baseline flash. I've sometimes had to start all over, with a different flash and make "baby steps" to get a good tune. I often make only one change at a time, to verify if the "one" change is good or not.

    dave w
    Attached Files Attached Files

  3. #3
    Electronic Ignition!
    Join Date
    Mar 2019
    Age
    35
    Posts
    15
    Quote Originally Posted by dave w View Post
    Attached is a Stock 2002 Express Van 5.7 liter with 4L80E .cal file.
    Also attached is the "Compare" summary .txt file.

    The Express Van will have a different gear ratio and tire size, so the transmission shift parameters will be very different.

    I wonder if the attached 5.7 flash, which has VATS Disabled, is worth trying? Sometimes, tuning requires starting from a different baseline flash. I've sometimes had to start all over, with a different flash and make "baby steps" to get a good tune. I often make only one change at a time, to verify if the "one" change is good or not.

    dave w
    I admittedly have no idea what im looking at when it comes to tuning. Jeff created this for me (and has been very helpful in trying to resolve this) and im just trying to get input on how a base tune should get built using EFIlive or HPtuners since tunercat doesnt exist around me.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,308
    The attached .ctz file was downloaded from the EFI Live Tune Depot website several years ago, which has a disappeared from the Internet or is no longer supported by EFI Live. I've used Tune Depot files without any issues or problems, except the VIN numbers are not complete.

    The attached .bin file should work with either HP Tuners or EFI Live. The attached .bin file was a file I found in my "Unknown" file folder. Typically "Unknown" are files someone shared with me or I downloaded from the Internet that are not verified as stock.

    dave w

  5. #5
    Electronic Ignition!
    Join Date
    Mar 2019
    Age
    35
    Posts
    15
    Thanks! I'll see if my hptuner friend can see it

  6. #6
    Electronic Ignition!
    Join Date
    Mar 2019
    Age
    35
    Posts
    15
    I'm getting the error message "http response failure" when trying to connect to the pcm to edit parameters, however we can read all the sensors in real time. Since the pcm is tuned with tunercat and we were trying to use hptuner, would this cause that type of error? Bricked/locked PCM?

Similar Threads

  1. Log Review
    By Mwtvvo in forum GM EFI Systems
    Replies: 39
    Last Post: 09-11-2022, 07:46 AM
  2. 1994 Corvette EEHack DataLog Review
    By RISK81 in forum GM EFI Systems
    Replies: 19
    Last Post: 05-14-2019, 05:38 AM
  3. 2000 LS1 Camaro Tune Speed Density / 2bar with TunerCat Question
    By Performance SS in forum TunerCat OBDII
    Replies: 0
    Last Post: 04-19-2016, 07:01 PM
  4. Requesting a review of some log files.
    By damanx in forum GM EFI Systems
    Replies: 55
    Last Post: 11-15-2013, 01:58 AM
  5. GQ-4X Programmer from MCUMALL.com Review!
    By EagleMark in forum EFI Parts, Supplies, Software and Reviews!
    Replies: 8
    Last Post: 06-23-2013, 09:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •