Results 1 to 5 of 5

Thread: Hi from Wollongong Australia

  1. #1
    Fuel Injected!
    Join Date
    Apr 2012
    Posts
    26

    Cool Hi from Wollongong Australia

    Hi Guys,

    Good looking forum you have here.

    Looking forward to cruising around and learning a few more tips and tricks for TP5 & my APU1.

    Currently tuning our V6/V8 Holdens (PRE-LS1) with TP5 & Moates and have found the resources on the old TP forum & Delcohacking forum really helpful.

    I dont post alot unless there is an obvious answer that I can offer - so I tend to read alot and try to put into practice what I learn.

    I also tune LS1 (&newer variants) with Efi-Live and am an active user of LS1.com.au .

    Current vehicle is a 2006 Commodore (Pontiac G8GT) 6L with Liquid Injected LPG setup, Rotrex Supercharger (D-I-Y install), cam RR's etc. - around 500Hp at the wheels.

    I also tinker a little in electronics and have a couple of interesting Arduino projects on the boil.


    Thanks to the admin & mods for creating a space for us all to share our ideas & adventures.


    Cheers, Chris

  2. #2
    Welcome!
    Familiar with 1227747 and 16197427 PCMs

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477


    Glad you found us, there's been several people talking abount the Arduino.


    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,306


    dave w

  5. #5
    Fuel Injected!
    Join Date
    Apr 2012
    Posts
    26
    Cheers guys - & thanks for the welcome!

    I'll try to contribute where I can and will keep you up to date with my little projects.

    All the best!

    Chris

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •