Results 1 to 9 of 9

Thread: 16168625 ecm binaries

  1. #1
    Carb and Points!
    Join Date
    May 2019
    Posts
    2

    16168625 ecm binaries

    Hello,
    New to this forum environment but have done quite a bit of home brew tuning with GM 1227747 and 1227730 ecms. Are there any $E6 binaries around so I can start playing with a new ecm?

  2. #2
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    50
    Posts
    504

  3. #3
    Fuel Injected!
    Join Date
    Oct 2015
    Location
    Hell, AKA California
    Posts
    96
    I'd mess with the $0D binaries. The $0D will run in the 16168625 PCM, has more work put into it and thus more tune ability. There are also more stock $0D binaries for download on this website compared to $E6.

    http://www.gearhead-efi.com/Fuel-Inj...Information-0D

  4. #4
    Carb and Points!
    Join Date
    May 2019
    Posts
    2
    Thanks c5wagner I'll dig into the $0D binaries. I have an ecm with the V6 calpak so i have to find a V8 one to install a flash chip on. I will let you know how things progress. Again thanks for the info!

  5. #5
    Fuel Injected!
    Join Date
    Oct 2015
    Location
    Hell, AKA California
    Posts
    96
    Quote Originally Posted by Tim_EFI View Post
    Thanks c5wagner I'll dig into the $0D binaries. I have an ecm with the V6 calpak so i have to find a V8 one to install a flash chip on. I will let you know how things progress. Again thanks for the info!
    I have an extra v8 memcal with a winbond flash chip (EEPROM) installed, if your burner supports the winbond w27c512, I'll send it to you for $25.

  6. #6
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    I sort of remember a document floating around(years ago, probably close to 20 years) so you could modify the NETRES(Limp, resistor network), basically mimic what GM did with the 305/350/454, of the memcals. Does anyone have a copy or link to the information?
    -Carl

  7. #7
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    A number of people worked together here to get through some of the old info and some new info to come up with this:
    http://www.gearhead-efi.com/Fuel-Inj...ull=1#post2855

    This may be some of the original documentation you are remembering:
    https://web.archive.org/web/20030216...ECM/inj_op.htm

  8. #8
    Fuel Injected!
    Join Date
    Oct 2015
    Location
    Hell, AKA California
    Posts
    96
    Quote Originally Posted by In-Tech View Post
    I sort of remember a document floating around(years ago, probably close to 20 years) so you could modify the NETRES(Limp, resistor network), basically mimic what GM did with the 305/350/454, of the memcals. Does anyone have a copy or link to the information?
    There's still the issue of the knock board between memcals, so far I've noticed that the all 5.7l TBI memcals have #26 in the little box, 5.0l TBI have #27, 4.3l TBI have #19 and I haven't dealt with 4.3l CPI or 454 memcals yet.

  9. #9
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    Interesting. The 5.0 identifier "27" hasn't been listed before.
    http://www.gearhead-efi.com/Fuel-Inj...your-Memcal-ID

    There is a pile of good memcal information in that thread. Post 19 has a number of good files with it.
    http://www.gearhead-efi.com/Fuel-Inj...ll=1#post21015

Similar Threads

  1. 16168625 ecm pinout help
    By Adavis in forum Other EFI systems and related topics
    Replies: 2
    Last Post: 04-22-2018, 04:01 AM
  2. 16168625 to 16197427
    By Stokes1114 in forum GM EFI Systems
    Replies: 5
    Last Post: 04-22-2017, 08:51 PM
  3. Looking for bootable binaries 94-95 lt1 pcm
    By jthompson122183 in forum GM EFI Systems
    Replies: 11
    Last Post: 01-06-2015, 07:36 AM
  4. Looking for two binaries: AKCW and BAKK
    By brianko in forum GM EFI Systems
    Replies: 2
    Last Post: 08-02-2013, 07:40 AM
  5. 16168625 PCM Information $E6
    By EagleMark in forum GM ECM - Bins - TunerPro Definition Files - Wiring Diagrams - Tuner Info!
    Replies: 6
    Last Post: 03-13-2012, 04:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •